Barco 26-0702000-00 Çî~åÅÉÇ=jÉãçêó=cìåÅíáçåë, içÅâáåÖ=~åÇ=råäçÅâáåÖ=oÉÖáëíÉêë, aÉäÉíáåÖ=oÉÖáëíÉêë

Advanced

Lock

Unlock

Delete

Register

5. Menu Orientation

Memory Menu

^Çî~åÅÉÇ=jÉãçêó=cìåÅíáçåë

The Advanced Memory Menu provides access to the following memory functions:

•Locking and Unlocking Registers

•Deleting Registers

Please note the following important points regarding the Advanced Memory Menu:

•the Advanced Memory Menu is only available in View Mode.

•If you initiate a Store or Recall function and you are not in the Advanced Memory Menu, the {Advanced} button is grayed out.

•If you initiate a Store or Recall function and you are already in the Advanced Memory Menu, the system automatically takes you back to the Memory Menu.

These functions occur to prevent you from locking, unlocking or deleting a memory register during a Store or Recall operation.

içÅâáåÖ=~åÇ=råäçÅâáåÖ=oÉÖáëíÉêë

The “lock/unlock register” feature is available in the following memory mode only:

•View Mode

By default, a newly stored memory register is unlocked. As desired, you can lock a register to prevent accidental deletion, or accidental over-writing.

To use the feature:

•From the Memory Menu, highlight the desired register in the table, and then press {Advanced}.

•From the Enables Menu, press {Advanced}.

On the Advanced Memory Menu, press the {Lock Unlock} button to toggle the mode.

•If currently unlocked, pressing {Lock Unlock} locks the register, and an “X” appears in the appropriate table cell under the Lock heading. If you attempt to delete or over-write the register, an error message pops up on screen.

•If currently locked, pressing {Lock Unlock} unlocks the register and removes the “X” from the table cell.

aÉäÉíáåÖ=oÉÖáëíÉêë

The “delete register” feature is available in the following memory mode only:

•View Mode

All registers except “locked” registers can be deleted. This action clears the selected memory register completely. To use the feature:

•From the Memory Menu, highlight the desired register in the table, and then press {Advanced}.

•From the Enables Menu, press {Advanced}.

On the Advanced Memory Menu, ensure that the register is unlocked. Then, press the {Delete Register} button to delete the register. You will be asked to confirm.

FSN Series • User’s Guide • Rev 01 185