bñíÉêå~ä=aph=q~ÄäÉ

5. Menu Orientation

System Menu

bñíÉêå~ä=aph=q~ÄäÉ

The External DSK Table provides information about each input. The yellow highlight automatically tracks the selected input connector in the Rear I/O View.

Name

Format

Error Reporting

Sync Mode

 

 

 

 

EXT DSK Cut

Native

On

Auto: Minimum Delay

EXT DSK Fill

Native

On

Auto: Minimum Delay

 

 

 

 

Figure 5-104.External DSK Table (sample)

The following columns of information are provided:

Name — indicates the name of the selected connector (DSK Cut or DSK Fill).

Format — displays the input’s format.

Error Reporting — “On” indicates that the connector is enabled and error reporting is active. “Off” indicates that error reporting is prevented. Use the {Error Reporting} toggle button to toggle the function.

Sync Mode — lists the mode selected with the {Sync Mode} button — either Auto, Frame Sync or Minimum Delay.

Sync

Mode

Auto

Refresh

Sync

Info

Freeze

Off

aph=`ìí=pÉíìé

To set up the DSK Cut input, touch its connector in the Rear I/O View. The menu changes to display the input’s setup functions.

In the Sync section, two functions are available:

Press {Sync Mode} to display the Sync Mode Pop-up, which enables you to set the selected DSK input’s sync mode. Refer to the “Understanding Sync Mode” section on page 211 for complete details.

When the selected DSK input’s sync mode is set to Auto and the system switches to Auto: Frame Sync, the system stays in that mode until the sync detection is manually refreshed. Press {Refresh Sync} to refresh the sync detection process for the selected native input.

This procedure enables the Auto mode to switch back to Minimum Delay mode

provided that the signal is within range. Please note:

~The button only appears when the selected input is set to Auto mode.

~In Auto: Minimum Delay mode, the button is grayed out.

~In Auto: Frame Sync mode, the button is active.

In the Tool Bar, the following adjustments are provided:

Press {Info} to display the Input Color Legend Pop-up. Refer to the “Connector Colors” section on page 204 for details.

Press {Freeze} to toggle the freeze “state” of the selected input.

~Select On to freeze the input.

~Select Off to un-freeze the input.

230

 

FSN Series • User’s Guide • Rev 01

 

Page 230
Image 230
Barco 26-0702000-00 manual bñíÉêå~ä=aph=q~ÄäÉ, aph=`ìí=pÉíìé, Menu Orientation, FSN Series • User’s Guide • Rev