Barco 26-0702000-00 3PGM Transition Section, 4M/E Bank, 5M/E Transition Section, 6Aux Section

3. Control Panel Orientation

Control Panel Descriptions

3)PGM Transition Section

For the switcher’s primary output, the PGM Transition Section enables you to perform manual or automatic cuts, mixes, wipes and a DSK (downstream key). A downstream “fade to black” is also provided. Refer to the “PGM Transition Section” on page 76 for complete details.

4)M/E Bank

On the FSN-150, the M/E Bank includes three buses: BG (Background), PST (Preset) and KEY. These buses are the locations where you select sources to include in transitions and effects.

Each button on the M/E bank includes an integral multi-color LED, which is used to indicate various source states. Directly above the top Key Bus is a row of displays that you can program with source names. Refer to the “M/E Bank” section on page 81 for more details.

Note

When M/E 2 control is enabled, the buttons on M/E 1 temporarily become the buttons for M/E 2. In Chapter 7, refer to the “M/E 2 Control on the FSN-150” section on page 349 for details.

5)M/E Transition Section

The M/E Transition Section enables you to perform manual and automatic transitions, such as cuts, mixes, wipes and keys. Refer to the “M/E Transition Section” heading on page 83 for details.

6)Aux Section

The Aux Section enables you to assign sources to Aux buses. The FSN Series includes six “native” Aux bus outputs as standard, and optional Aux outputs (both native and scaled) are available. Refer to the “Aux Section” heading on page 91 for details.

7)Custom Control Section

The Custom Control Section provides the ability to display up to eight switcher functions. See the “Custom Control Section” heading on page 93 for details.

8)Memory Section

The Memory Section enables you to store panel setups (and many other switcher functions) into memory registers, and recall setups from memory back to the panel. One thousand registers are provided (1 through 1000). Refer to the “Memory Section” heading on page 94 for more details.

9)Joystick

The Joystick is a three axis controller (X, Y and Z) that is used to adjust various switcher parameters. Refer to the “Joystick” section on page 98 for details.

10)Light Control

One Light Control is provided, which enables you to adjust the brightness of the script lights that connect to the rear panel.

FSN Series • User’s Guide • Rev 01 71