JVC MX-J30 Using Sleep Timer, Timer Priority, Select the preset station, Press SLEEP, time length

4		PRESET
	Set the on-time you want the unit

to turn on.

1)Press 4or ¢ to set the hour, then press SET.

2)Press 4or ¢ to set the minute, then

	press SET.	SET
	“OFF TIME” appears for 2 seconds, then
	the unit enters off-time setting mode.
5	Set the off-time you want the unit	PRESET

to turn off (on standby).

1)Press 4or ¢ to set the hour, then press SET.

2)Press 4or ¢ to set the minute, then

	press SET.	SET
	The unit enters preset station selecting
	mode.
6	Select the preset station.	PRESET

Using Sleep Timer

With Sleep Timer, you can fall asleep to music. You can set Sleep Timer when the unit is turned on.

How Sleep Timer actually works

The unit automatically turns off after the specified time length passes.

On the remote control ONLY: SLEEP

1 Press SLEEP.

The time length until the shut-off time appears

and the SLEEP indicator starts flashing on the display.

•Each time you press the button, the time length changes as follows:

102030 60 90 120

Canceled

2 Wait for about 5 seconds after specifying the

1) Press 4or ¢ to select the band (“TUNER FM” or “TUNER AM”), then press SET.

2)Press 4 or ¢ to select a preset channel number, then press SET.

The REC indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence.

SET

STANDBY

time length.

The SLEEP indicator stops flashing and remains lit.

To check the remaining time until the shut-off time, press SLEEP once so that the remaining time until the shut-off time appears for about 5 seconds.

To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display.

7 Press POWER to turn off the unit

(on standby) if necessary. POWER

If you want to listen to another source while recording.

Press REC START/STOP to stop recording. Without stopping it, you cannot change the source.

To turn on or off Recording Timer after its setting is done

1 Press TIMER/CLOCK repeatedly until

“REC” appears on the display.	TIMER
	/CLOCK
2 To turn off the Recording Timer, press
CANCEL.	DEMO
The REC indicator goes off from the display.	CANCEL
The Recording Timer is canceled, but the setting
for the Recording Timer remains in memory.

To turn on the Recording Timer, press SET.

The REC indicator lights up on the display. ºThe	SET
settings you have done are shown on the display
in sequence for your confirmation.

To cancel the setting, press SLEEP repeatedly so that the SLEEP indicator goes off.

• Sleep Timer is also canceled when you turn off the unit.

Timer Priority

Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps.

Here are examples.

•Recording Timer has priority over Daily Timer and Sleep Timer.

If Daily Timer is set to come on while Recording Timer is operating, Daily Timer will not come on at all.

AM 6:00 6:30 7:00 7:30

Recording Timer

Daily Timer

does not work.

If Recording Timer is set to come on while Sleep Timer is operating, Sleep Timer will not work (the SLEEP indicator does not go off).

AM 6:00 6:30 7:00 7:30

Recording Timer

Sleep Timer

does not work.

– 20 –

EN16-22.MX-J30[J]/5 20 99.1.27, 6:20 PM