jLb=O=`çåíêçä=çå=íÜÉ=cpkJNRM

7. Operations

M/E 2 Control on the FSN-150

jLb=O=`çåíêçä=çå=íÜÉ=cpkJNRM

M/E 2 control can be enabled or disabled on the FSN-150 using the M/E2 CTRL button in the Custom Control Section. When M/E 2 control is enabled on the FSN-150, you have complete access to more creative switcher “looks,” including the use of five keyers, up to four layers of DVE channels, advanced re-entry effects, and complete storage and recall of M/E 2 effects using the memory system.

SPrerequisites

~Ensure that you are familiar with the Custom Control Section. In Chapter 3, refer to the “Custom Control Section” heading on page 93.

„Use the following steps to use M/E 2 on the FSN-150:

1.Before using M/E 2 in production:

a.Use the {M/E Order} function on the Other Setup Menu to select the priority of M/E 2 in the switcher’s flow of video. In Chapter 5, refer to the “Other Setup Menu” heading on page 253 for details.

b.Per the requirements of your production, map M/E 1 and M/E 2 re-entry crosspoints to the panel. By default, the M/E 1 re-entry crosspoint is mapped to the M/E button in the PGM bank, but you must manually map additional re-entry crosspoints as required. In Chapter 6, refer to the “Button Mapping” heading on page 297 for mapping instructions.

c.Per the requirements of your production, assign DVE channels to keyers in M/E 2 as required. In Chapter 8, refer to the “Assigning DVE Channels to Keyers” section on page 389 for instructions.

2.Press the M/E2 CTRL button in the Custom Control Section to enable M/E 2 control. The Custom Control button lights solid when control is enabled.

~All Programmable Displays on the M/E turn orange for easy identification of M/E 2.

~M/E 2 functionality is now available for use in the normal manner, including keys, DVE assignments, and all memory register storage and recall functions.

3.Press the M/E2 CTRL button again to disable M/E 2 control. The Custom Control button turns off, and all Programmable Displays on the M/E turn green.

Important

When M/E 2 control is off, it simply means that the bank’s buttons are not physically on the FSN-150 panel. You still have the ability to recall all stored M/E 2 memory registers in the normal manner.

FSN Series • User’s Guide • Rev 01

 

349

 

Page 349
Image 349
Barco 26-0702000-00 manual jLb=O=`çåíêçä=çå=íÜÉ=cpkJNRM, Operations, SPrerequisites, FSN Series • User’s Guide • Rev