Barco 26-0702000-00 manual System Setup, FSN Series • User’s Guide • Rev

6. System Setup

Universal Input Setup

„Capture and Timing — Use the following steps to set up universal input capture and timing parameters:

1.Press {Setup} to display the Input Setup Menu for the selected universal input.

2.Press {Capture and Process} to display the Capture and Process Panel.

3.Press {Auto Acquire} to toggle the Auto Acquire mode On or Off as required.

~When Off, you can set the resolution using the {Input Format} button.

~When On, the system attempts to detect the resolution. When a match is found, the format is applied and the Format field in the table is updated. Once the system acquires a new format, it automatically scales the input up (or down) to the current native resolution.

Note

If an exact match cannot be found, you may need to use {Input Format} button to set the format manually.

4.If required, press {Input Format} to display the Input Format Keypad. Locate the desired format and press {Apply}.

5.Analog and DVI inputs only — Press {EDID Format} to display the EDID Format Keypad. Locate the EDID format and press {Apply} to program EDID.

Important

This function is designed for advanced users only. Do not program the EDID unless it is necessary.

6.Analog and DVI inputs only — Press {Color Space} to toggle between SMPTE and RGB processing, as required.

7.Analog inputs only — Press {1:1 Sampling} to toggle the 1:1 sampling mode on or off, as required.

8.Analog inputs only — Press {Sample Phase}, and use the Sample Phase control to adjust the input’s A/D converter. For optimum visual results when adjusting high-resolution sources, output a burst test pattern from the source, and adjust for minimum noise.

9.Analog inputs only — Press {Adjust H Timing} to adjust the image’s horizontal timing. Use the {H Pos}, {H Active} and {H Total} controls as required.

10.Analog inputs only — Press {Adjust V Timing} to adjust the image’s vertical timing. Use the {V Pos} and {V Active} controls as required.

„Processing Setup — Use the following steps to set up universal input processing parameters:

1.Press {Sharpness}, and use the Sharpness control to set the input’s sharpness.

2.Component, S-video and composite inputs only — Press {Pulldown Comp} to toggle the Pulldown Compensation mode on or off, as required.

3.Interlaced formats only — Press {De-Interlace} to display the De-Interlace Pop-up. Choose either Motion Adaptive or Field to Frame mode.

4.If Motion Adaptive de-interlacing is selected, press {Motion Threshold} and use the control to adjust the threshold of the motion adaptive de-interlacer, if required.

„Sizing and Scaling — Use the following steps to set up sizing and scaling:

1.Press {Sizing and Scaling} to display the Sizing and Scaling Panel.

294 FSN Series • User’s Guide • Rev 01