Manual background

8. DVE Operations

DVE Menu Orientation

asb=^ëëáÖå=jÉåì

From the System Menu, press {DVE Assign} to display the DVE Assign Menu:

Figure 8-3.DVE Assign Menu (sample)

The DVE Assign Menu enables you to assign DVE channels to keyers. Once assigned, you can elect to use the DVE or bypass the DVE — simply by selecting the desired mode on the associated keyer’s Keyer Menu.

DVE assignment is highly flexible. You can:

Assign, un-assign and name DVE channels.

Fly PIPs, luma keys, linear keys and split keys. Refer to the DVE Assignment Information Pop-upbelow for details.

On the menu, the left side of the Palette shows the Rear I/O View, while the right side shows the DVE Assignment Table. Please note:

Two chassis slots (9 and 10) are provided for DVE cards, each of which provides two DVE channels — for a maximum of four channels on line.

DVE channels 1 and 2 are dedicated to slot 9. Channels 3 and 4 are dedicated to slot 10. If a DVE card is only installed in slot 10, only channels 3 and 4 are available. If a DVE card is not installed, the slot label reads “Not Installed.”

On each card, each channel is a button that is used for DVE assignment and naming channels.

FSN Series • User’s Guide • Rev 01

 

363

 

Page 363
Image 363
Barco 26-0702000-00 manual asb=^ëëáÖå=jÉåì, DVE Operations, FSN Series • User’s Guide • Rev