Barco 26-0702000-00 j~é=_ìííçåë=jÉåì=cìåÅíáçåë, Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

System Menu

j~é=_ìííçåë=jÉåì=cìåÅíáçåë

Panel

Button

8

SHIFT

Map

Source /

Cut

Map

Linear

Key Fill

Un-map

Source /

Cut

The following adjustments are provided in the Map Buttons Menu:

•Press {Panel Button} (or use the knob) to select the button that you wish to map. Note that selecting buttons in this manner automatically affects the state of the {SHIFT} button.

•Press {SHIFT} to switch between mapping un-shifted and shifted buttons:

~When {SHIFT} is off, you can map buttons 1 - 10 plus M/E, and the labels in the Button column read 1 - 10 plus M/E.

~When {SHIFT} is on, you can map buttons 11 - 20 plus M/E, and the labels in the Button column read 11 - 20 plus M/E.

•Press {Map Source/Cut} to map an input (source) or a linear key “cut” signal to the selected panel button. On the highlighted row in the table, the cell under the Source/Cut column highlights in blue, and the Map Buttons Keypad appears.

Refer to the “Map Buttons Keypad” section below for details.

•Press {Map Linear Key Fill} to map a linear key “fill” signal to a panel button. On the highlighted table row, the cell under the Linear Key Fill column highlights in blue, and the Map Buttons Keypad appears. Refer to the “Map Buttons Keypad” and “Mapping Luma Keys and Linear Keys” sections for details.

•On the highlighted row, press {Un-map Source/Cut} to un-map the source in the Source/Cut column. Once pressed, the source is removed from the panel.

Un-map

Linear

Key Fill

•On the highlighted row, press {Un-map Linear Key Fill} to un-map the source in the Linear Key Fill column. Once pressed, the source is removed from the panel.

226 FSN Series • User’s Guide • Rev 01