jìäíáîáÉïÉê=lìíéìí=pÉíìé=jÉåì

9. Multiviewer Operations

Multiviewer Menu Orientation

jìäíáîáÉïÉê=lìíéìí=pÉíìé=jÉåì

From the Multiviewer Setup Menu, press {Output Setup} to show the Multiviewer Output Setup Menu. This menu sets the resolution for both MVR outputs.

Output Format

DVI

Sync

+H+V

Figure 9-2.Multiviewer Output Setup Menu (sample)

The following functions are provided in the menu’s Tool Bar:

To change the Multiviewer output format, press {Output Format} to display the Output Format Keypad. The keypad is divided into two columns:

The left-hand column displays the list of available output formats.

The right-hand column indicates the output connectors (on the MVR Card) that are active for the selected output resolution, e.g., DVI only or SDI, DVI.

Important

The list of available output formats changes, based on the

 

system’s native resolution.

 

 

Press {DVI Sync} to select the polarity of the digital sync output on the MVR’s DVI output connector. The following four options are available in the pop-up: +H+V, +H-V, -H+V, and -H-V.

FSN Series • User’s Guide • Rev 01

 

417

 

Page 417
Image 417
Barco 26-0702000-00 manual jìäíáîáÉïÉê=lìíéìí=pÉíìé=jÉåì, Multiviewer Operations, FSN Series • User’s Guide • Rev