`çããìåáÅ~íáçåë=pÉíìé=jÉåì

5. Menu Orientation

System Menu

`çããìåáÅ~íáçåë=pÉíìé=jÉåì

From the System Menu, press {Com Setup} to display the Communications Setup Menu, which enables you to “discover” an FSN-1400 chassis, and set up Ethernet.

The figure below illustrates a sample Communications Setup Menu.

Figure 5-72.Communications Setup Menu (sample)

At the top of the menu, the Ethernet Status Table provides system Ethernet information, along with an important note reminding you to set both the IP address and the Subnet Mask, prior to pressing {Apply}.

Use the top Knob to scroll the yellow highlight. Changes can be made to the ports shown on the highlighted row. The following columns of information are provided:

Connection — lists the two control panel Ethernet ports, and the single FSN- 1400 Ethernet port.

Status — provides Ethernet port status, either “Connected” or “Not Connected.”

DHCP — lists DHCP status, either ON or OFF.

Note

DHCP status cannot be changed in version 3.0.

IP Address — lists the IP address of the associated Ethernet port. This address can be changed using the {Set IP Address} button.

194

 

FSN Series • User’s Guide • Rev 01

 

Page 194
Image 194
Barco 26-0702000-00 manual `çããìåáÅ~íáçåë=pÉíìé=jÉåì, Menu Orientation, FSN Series • User’s Guide • Rev