bñíÉêå~ä=aph=pÉíìé=jÉåì

5. Menu Orientation

System Menu

bñíÉêå~ä=aph=pÉíìé=jÉåì

From the System Menu, press {External DSK Setup} to display the External DSK Setup Menu, which enables you to set up the DSK Cut and Fill inputs on the M/E Card. These two inputs are only used on the DSK when {External Key} is enabled.

The figure below illustrates a sample menu with the DSK Cut connector selected.

Figure 5-103.External DSK Setup Menu, DSK Cut selected (sample)

The External DSK Setup Menu is divided in half:

The left side of the Palette shows the Rear I/O View, in which only the two DSK input connectors are active. All other output connectors are grayed out.

The right side of the Palette shows the External DSK Table, which provides setup functions for each input.

To set up an external DSK input, press the desired connector in the Rear I/O View. In the External DSK Table, the selected input is automatically highlighted.

The following topics are discussed in this section:

External DSK Table

DSK Cut Setup

DSK Fill Setup

FSN Series • User’s Guide • Rev 01

 

229

 

Page 229
Image 229
Barco 26-0702000-00 manual bñíÉêå~ä=aph=pÉíìé=jÉåì, The External DSK Setup Menu is divided in half, Menu Orientation, • • •