![](/images/new-backgrounds/1210647/210647163x1.webp)
Page 82 - Technical Specifications | Technical Data |
SNMP Functionality
The IP Office SNMP Agent implements SNMPv1 on a
SNMP Agent Configuration
The following operational items may be configured for the IP Office SNMP Agent using the IP Office Manager:
SNMP Server:
•Enable/disable
Enabled: the device to respond to SNMP requests and send traps for any associated events that occur if so configured.
Disabled: the SNMP agent on the device does not respond to SNMP requests or send traps.
•UDP Port (default 161)
Changes the default port value of the SNMP Agent.
•
Community string of up to 32 alphanumeric characters for
Two trap destinations:
•IP Address
•UDP Port (default 162)
•Community string of up to 32 alphanumeric characters.
•Event mask specifying the events the trap destination is interested in receiving
-generic (coldStart, warmStart, linkDown, linkUp, authenticationFailure)
-licence – License Key Server access fault notifications
-phone change – connected phone change notification
MIBs Supported
The following MIBs are supported by the IP Office SNMP Agent:
•IETF RFC1213
-Provides statistics for LAN, WLAN and WAN interfaces
-Groups supported: system, interfaces, at, ip, icmp, tcp, udp and snmp
•IETF RFC1215
-Provides definitions of generic SNMP traps
-Traps supported: warmStart, coldStart, linkDown, LinkUp and authenticationFailure
•IETF RFC2737 ENTITY-MIB
-Provides architectural representation
-Groups supported: entityPhysical and entityGeneral
•Avaya
-Provides device/entity identification OIDs
•Avaya
-Provides root OIDs for functional MIBs
-Provides system wide notifications for events relating to functional entities.
•ipoGenLKSCommsFailureEvent
•ipoGenLKSCommsOperationalEvent for License Key Server communication events
•Avaya
-Provides
•
-Provides notifications of phone change event.
•IpoPhonesChangeEvent
Page 82 - Technical Data | IP Office Installation Manual |
Technical Specifications | 40DHB0002USCL – Issue 9 (28th October 2003) |