Introduction | General - Page 5 |
Introduction
General
This manual covers the installation of your Avaya IP401/403/406/412 Office equipped with software release Level 1.0+ through to 2.0+. It is intended for use by installers and maintainers who have successfully completed the appropriate IP Office training courses.
Ensure that you have read and understood this manual before beginning installation.
For installation instructions for the Avaya IP Office - Small Office Edition, refer to the separate Installation Manual (available on CD).
Scope of Manual
This manual, for Avaya IP Office systems, covers the following subjects and should be read in the sequence shown below:
–Avaya IP Office Platforms :
This section provides details of the various Avaya IP Office platforms available. Illustrations of the front and rear of each unit show what ports/sockets/etc are provided. Typical configuration examples are also provided in this section. A further section details the country variants of modules/trunks/integral modules/etc.
–Preparing for and Installing a new system :
These sections provide all the information required and the actions to be performed to physically install an IP Office, i.e. what tools are required, the environmental/power requirements, wall mounting, rack mounting, etc. The software installation is covered in the following section.
–Basic System Programming :
System programming is necessary for configuration and maintenance of the Avaya IP Office. This manual only covers the installation of the IP Office suite of programs (see page 46). For full details refer to the Installation Wizard Help files and/or to the Manuals contained on the documentation CD (supplied with every unit).
–Terminal/Telephone Installation :
This manual details the information required to install telephone but does not detail the usage and functionality of IP Office terminals/telephones. These details are to be found in the appropriate User Guides.
The terminals/telephones that are supported by the IP Office are (these are also used across a number of Avaya platforms:
Avaya 2000 Series | 20AT, 20CC, 2010, 2030, 2050, 20DSS/BLF and 20DT |
Avaya 2400 Series | 2420 |
Avaya 3600 Series | 3616, 3626 |
Avaya 4400 Series | 4406D, 4412D, 4424D and 4450DSS* |
Avaya 4600 Series | 4602, 4602SW, 4620, 4606, 4612 and 4624 |
Avaya 6400 Series | 6408D+, 6416D+M, 6424D+M and XM24(DSS) |
*Caution: See page 68 for wiring details on a 4450DSS module.
–Safety and Homologation Statements :
This provides all the necessary Safety, Homologation Statements and Regulatory Instructions for Use required. This section also detail where further information, including other Manuals and support telephone numbers, can be obtained
–Technical Data :
This manual contains information on the Port Pinouts/Safety classifications, cables, and basic technical specifications only (see page 79). Descriptions of the functionality, features and performance of the IP Office are covered by the Product Description.
IP401 Compact Office Platform
IP Office Installation Manual | Introduction - Page 5 |
40DHB0002USCL – Issue 9 (28th October 2003) | General |
