![](/images/new-backgrounds/1210647/21064781x1.webp)
Installing a New System | Initial Assembly - Page 41 |
Installation of Voice Compression Modules (VCM)
Optional Voice Compression Modules (only one for IP 403/IP406 module and a max. of two for IP412, see pages 10, 14 and 18 respectively) are fitted to an IP Office base unit as follows:
Procedure
1.Remove the three fixing screws on the rear of cover.
2.Turn the unit over and remove the four fixing screws from the base.
3.Slide the cover from the unit.
4.Mount the VCM in position as shown below and secure with the two
5.Replace cover and secure with the seven fixing screws.
CAUTION: While installing, ensure that you wear a ground wrist strap that is connected to a suitable grounding point.
IP Office Installation Manual | Installing a New System - Page 41 |
40DHB0002USCL – Issue 9 (28th October 2003) | Initial Assembly |