Chapter 3 Installing the Switch

Rack-Mounting

If you want to install the L brackets at the rear of the chassis, follow these steps:

Step 1 Remove the two rack-mount brackets and eight M4 flat-head screws from the accessory kit.

Note The L brackets are stamped with different part numbers to identify them as left and right. The left-side L bracket (as viewed from the front of the chassis) has the part number

700-20931-xx; the right-side L bracket (as viewed from the front of the chassis) has the part number 700-20932-xx.

Step 2 Position the left L bracket (p/n 700-20931-xx) against the right chassis side, and align the countersunk screw holes. (See Figure 3-1, bottom view.)

Step 3 Secure the L bracket to the chassis with four M4 x 8 mm Phillips flat-heat screws.

Step 4 Repeat Steps 2 and 3 for the right L bracket (p/n 700-20932-xx).

Installing the Chassis in the Rack

To install the chassis in the rack, follow these steps:

Step 1 Have one person carefully lift and position the chassis in front of the rack.

Step 2 Slide the chassis into the rack until the L brackets are in contact with the rack.

Tip Use a tape measure or a level to ensure that the chassis is installed level in the rack.

Step 3 Slide the chassis up or down in the rack until three screw holes in each L bracket are aligned with corresponding mounting holes in the rack.

Step 4 While one person holds the chassis in place, secure the chassis to the rack with the six 10-32 x 3/4-inch or 12-24 x 3/4-inch Phillips-head machine screws (three on each side) that are supplied in the accessory kit.

Figure 3-2(top view) shows how to install a chassis in a rack when the chassis has the L brackets attached at the front of the chassis. Figure 3-2(bottom view) shows how to install a chassis in a rack when the chassis has the L brackets attached at the rear of the chassis.

Cisco ME 6500 Series Ethernet Switch Installation Guide

3-6

OL-8900-03

 

 

Page 45 Page 47
Page 46
Image 46
Cisco Systems ME 6500 manual Installing the Chassis in the Rack
Page 45 Page 47

ME 6500 specifications

The Cisco Systems ME 6500 is a sophisticated Ethernet switch designed to cater to the demanding needs of service providers and large enterprises. Engineered to deliver high performance and reliability, the ME 6500 series is ideal for both metro Ethernet applications and data center environments. One of its standout features is the ability to handle massive bandwidth, making it suitable for high-capacity networks. The switch supports a range of Ethernet services that facilitate seamless connectivity and network expansion.

At the core of the ME 6500 is its ability to provide Layer 2 and Layer 3 functionalities, which allows for flexibility in network design. This dual-layer capability enhances the switch's efficiency in managing traffic and ensures optimal forwarding of data packets. In addition, the ME 6500 series supports a wide range of Ethernet interfaces, including 10 Gigabit and 1 Gigabit Ethernet ports, which are essential for accommodating diverse bandwidth requirements.

One of the defining characteristics of the Cisco ME 6500 is its scalability. It supports up to 192 10 Gigabit Ethernet ports within a single chassis, enabling organizations to expand their network without compromising performance. Furthermore, the switch includes advanced Quality of Service (QoS) features that allow for traffic prioritization, which is crucial for maintaining the performance of voice and video services across the network.

The ME 6500 switch is also equipped with robust security features, including Access Control Lists (ACLs) and secure management protocols. These features protect sensitive data as it traverses the network, ensuring that only authorized users have access to critical resources. Management of the switch is simplified through Cisco’s management tools, allowing network administrators to monitor, configure, and troubleshoot the device efficiently.

Additionally, the switch supports various redundancy protocols, including Rapid Spanning Tree Protocol (RSTP) and Link Aggregation Control Protocol (LACP), ensuring high availability and minimizing downtime.

Overall, the Cisco ME 6500 is a powerful and versatile solution that meets the heavy demands of modern network environments, delivering outstanding performance, security, and scalability for both service providers and large enterprises. Its advanced features make it a go-to choice for organizations looking to future-proof their networking infrastructure.
Top Page Image Contents