Chapter 2 Preparing for Installation

Site Requirements

Table 2-1 Grounding Practice Guidelines (continued)

 

Electromagnetic

 

Environment

Noise Severity Level

Grounding Recommendations

 

 

 

A new commercial building is

Low

Best grounding practices should be followed

not subject to natural

 

as closely as possible; consult with the site or

environmental noise or

 

local electrician. Electromagnetic noise

man-made industrial noise. This

 

problems are not anticipated, but installing a

building contains a standard

 

best practice grounding system in a new

office environment.

 

building is often the least expensive route

 

 

and the best way to plan for the future.

 

 

 

An existing commercial building

Low

Best grounding practices should be followed

is not subject to natural

 

as much as possible; consult with the site or

environmental noise or

 

local electrician. Electromagnetic noise

man-made industrial noise. This

 

problems are not anticipated, but installing a

building contains a standard

 

best practice grounding system is always

office environment.

 

recommended.

 

 

 

Note In all situations, grounding practices must comply with local National Electric Code (NEC) requirements or local laws and regulations.

Preventing Electrostatic Discharge Damage

Electrostatic discharge (ESD) damage, which can occur when FRUs are improperly handled, results in intermittent or complete failures.

To prevent ESD damage, follow these guidelines:

Always use an ESD wrist strap and ensure that it makes maximum contact with bare skin. ESD grounding straps are available with banana plugs, metal spring clips, or alligator clips. All Cisco ME 6524 Ethernet switch chassis are equipped with an ESD connector (identified by the ground symbol next to the connector) on the front panel.

If you choose to use an ESD wrist strap equipped with an alligator clip, you must attach the system ground lug to the chassis to provide a proper grounding point for the ESD wrist strap.

Note This system ground is also referred to as the network equipment building system (NEBS) ground.

If your chassis does not have the system ground attached, you must install the system ground lug.

Note You do not need to attach a supplemental system ground wire to the system ground lug; the lug provides a direct path to the bare metal of the chassis.

Cisco ME 6500 Series Ethernet Switch Installation Guide

 

OL-8900-03

2-7

 

 

 

Page 35
Image 35
Cisco Systems ME 6500 manual Preventing Electrostatic Discharge Damage

ME 6500 specifications

The Cisco Systems ME 6500 is a sophisticated Ethernet switch designed to cater to the demanding needs of service providers and large enterprises. Engineered to deliver high performance and reliability, the ME 6500 series is ideal for both metro Ethernet applications and data center environments. One of its standout features is the ability to handle massive bandwidth, making it suitable for high-capacity networks. The switch supports a range of Ethernet services that facilitate seamless connectivity and network expansion.

At the core of the ME 6500 is its ability to provide Layer 2 and Layer 3 functionalities, which allows for flexibility in network design. This dual-layer capability enhances the switch's efficiency in managing traffic and ensures optimal forwarding of data packets. In addition, the ME 6500 series supports a wide range of Ethernet interfaces, including 10 Gigabit and 1 Gigabit Ethernet ports, which are essential for accommodating diverse bandwidth requirements.

One of the defining characteristics of the Cisco ME 6500 is its scalability. It supports up to 192 10 Gigabit Ethernet ports within a single chassis, enabling organizations to expand their network without compromising performance. Furthermore, the switch includes advanced Quality of Service (QoS) features that allow for traffic prioritization, which is crucial for maintaining the performance of voice and video services across the network.

The ME 6500 switch is also equipped with robust security features, including Access Control Lists (ACLs) and secure management protocols. These features protect sensitive data as it traverses the network, ensuring that only authorized users have access to critical resources. Management of the switch is simplified through Cisco’s management tools, allowing network administrators to monitor, configure, and troubleshoot the device efficiently.

Additionally, the switch supports various redundancy protocols, including Rapid Spanning Tree Protocol (RSTP) and Link Aggregation Control Protocol (LACP), ensuring high availability and minimizing downtime.

Overall, the Cisco ME 6500 is a powerful and versatile solution that meets the heavy demands of modern network environments, delivering outstanding performance, security, and scalability for both service providers and large enterprises. Its advanced features make it a go-to choice for organizations looking to future-proof their networking infrastructure.