4-11
Cisco ME 6500 Series Ethernet Switch Installation Guide
OL-8900-03
Chapter 4 Removal and Replacement Procedures
Upgrading the Memory
Figure 4-5 Location of SP and RP DRAM DIMMs
Step 6 Release the old DRAM DIMM from its socket by simultaneously bending the locking spri ng tab on each
side of the socket outward and then pivot the DRAM DIMM up away from the tabs. Be careful not to
bend the locking spring tabs too far, because you can break them. (See Figure 4-6.)
1SP DRAM DIMM and socket 2RP DRAM DIMM and socket
1
2
front
rear
280751