CONNECTING TO AN EXTERNAL DEVICE (FRONT)
When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.AUX Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks of
this unit.
Then use [SELECT] or [CH. K / L] until "AUX" appears on the screen.
ex. |
|
|
| [Front of the unit] | FOR USE |
VCR or video camera, etc. |
|
|
| PREPARATION | |
| To the Audio output jack |
|
|
| |
|
|
|
|
| |
(OUT) | Audio Cable |
|
| (IN) |
|
| (commercially available) | OPEN / CLOSE |
|
|
|
|
|
|
|
| |
|
| VIDEO | AUDIO | HEADPHONE |
|
| To the Video output jack |
| (IN) |
| |
(OUT) | Video Cable |
|
|
|
|
| (commercially available) |
|
|
|
|
INSTALLING THE BATTERIES IN REMOTE CONTROL
1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity
3)Replace the cover.
1 | 2 | 3 |
[BATTERY PRECAUTIONS]
•Be sure to follow the correct polarity as indicat- ed in the battery compartment. Reversed batter- ies may cause damage to the device.
•Do not mix different types of batteries together (e.g. Alkaline and
•If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
•Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
7
EN
