![](/images/new-backgrounds/1210647/21064729x1.webp)
IP406 Office Platform |
| IP406 Office - Front View - Page 15 | ||
IP406 Office - Front View |
|
|
| |
Expansion Ports 1 | ISDNPorts 1 | Green LED | Yellow LED | Port 8 |
Green Status LEDs | Green Status LEDs | Solid Green LED- LANOK | On - 100Mbps operation | (Cascade Port) |
|
| Flashing Green - LANOKand active | 0ff - 10Mbps operation |
|
WANPort | YellowLED |
|
Green Status LED | LANCollision | LANPorts |
| Unit Status | |
|
| |
| Red = Alive but not initiated | Cascade Switch for Port 8 |
| Green = Running OK |
Port connections
•LAN Ports
The eight
LAN ports allow information relating to incoming and outgoing telephone calls to be forwarded to PC based applications. They also provide access to the router functionality/configuration of the IP406 Office platform for both data and Voice over IP (VoIP) calls. (Where IP telephony is required, the hub must be connected to a suitable LAN switch with QoS capabilities.) This eight port
Where more than eight LAN connections are required, the eighth LAN port can be used for cascading to other hubs. The Cascade pushbutton to the right of this port is used to set the mode. When the Cascade switch is in the out position the port can be connected to another hub without the need for a crossover cable, i.e. the port is an MDI type port. When the Cascade switch is in the in position the port can be connected directly to a PC.
Cables
IP406 Office PRI 30 E1 & PRI 24 T1 are supplied with one red CAT5E cable. IP406 Office Analog 4 is supplied with four red CAT5E cables. IP406 Office BRI 16 is supplied with eight red CAT5E cables. For Port Pinouts and Cables, refer to pages 63 and 67 respectively.
IP Office Installation Manual | IP406 Office Platform - Page 15 |
40DHB0002USCL – Issue 9 (28th October 2003) | IP406 Office - Front View |