Tripp Lite OMNI1000ISO warranty Specifications, System Overview, Output, Input, Battery

Built-in surge suppression (backed by $200,000 Ultimate Lifetime Insurance) safeguards connected equipment against damage SURGE VOLTAGE WITHSTAND CAPABILITY: ANSI/IEEE C62.41 Catagories A & B 6KV/200/500 amp 100Khz Ringwave and category B BiWave

SURGE VOLTAGE ATTENUATION: N-G 2000:1, L-G 240:1, L-N 100:1

INSERTION LOSS: 65 db N-G from 10Khz to 100Khz, 45 to 60 db L-G from 10Khz to 100Khz, 18 to 54 db L-N from 50Khz to 500 Khz

6 UPS-supported AC outlets; 6-ft. cord 2-year product warranty

Specifications

SYSTEM OVERVIEW

Voltage compatibility	120V
Frequency	60Hz
compatibility
OUTPUT
Output VA	1000
Output watts	700
Output nominal	120V (line mode) / 115V (battery mode)
voltage
Output voltage	LINE MODE: Sine wave line voltage 120V (-18%/+8%) / BATTERY MODE: 115V (+/-5%)
regulation
Output frequency	LINE MODE: Passes line frequency of 60Hz (+/-10%)
regulation
Outlet quantity / type	6 NEMA 5-15R
INPUT
Maximum input	7.6A at 120V
amps
Input connection	NEMA 5-15P
type
Input cord length	6 ft./1.8m
Recommended	15A 120V
Electrical Service
BATTERY
Full load runtime	8 min. (700W)
Half load runtime	24 min. (350W)
DC system voltage	36V
Typical battery	4-6 years (typical)
lifespan
Battery recharge rate	2-4 hours to 90%
Replacement	RBC53
Battery Cartridge

VOLTAGE REGULATION

Voltage regulation description

Overvoltage correction

Brownout correction

Severe brownout correction

Line-interactive UPS systems offers two levels of brownout correction and one level of overvoltage correction to maintain usable, computer grade output

Input voltages between 128-143V are reduced by 9%

Input voltages between 96-107V are boosted by 10%

Input voltages between 85-95V are boosted by 20%

LEDS ALARMS & SWITCHES

Front panel LEDs

5 diagnostic LEDs indicate AC present, on battery, voltage correction status, overload and battery low/replace status