HP 3015 manual Scanning by using hp LaserJet Scan software, To scan to a file, Click Settings

Scanning by using hp LaserJet Scan software

Note

Note

Use the HP LaserJet Scan software program to scan an item to any of the following:

●e-mail

●a folder

●another software program that you specify

●the Readiris OCR program, if it is installed on the computer

For more detailed instructions about loading original documents into the automatic document feeder (ADF), see Loading originals to scan.

Scanning to e-mail

1.Adjust the automatic document feeder (ADF) media lever to accommodate either a single sheet or a stack of media. (For more information, see Loading originals to scan.

2.Load the originals that are to be scanned face-down in the ADF, with the top of the document leading into the device. Adjust the media guides to hold the originals in place.

3.On the computer, click Start, select Hewlett-Packard, select hp LaserJet 3015, and then select Scan.

OR

Press START SCAN on the device. HP LaserJet Scan software opens on the computer. Pressing START SCAN to start the HP LaserJet Scan software is not supported when the device is connected to a network. (Direct-connect only.)

4.In the HP LaserJet Scan dialog box, select Send it through e-mail.

5.Click Settings.

6.Set the scanning options that you want, and then click OK to return to the HP LaserJet Scan dialog box.

You can save the settings using the Quick Sets option on the General tab. If you then select the check box after saving a Quick Set, the saved settings will be the default settings the next time you scan to e-mail.

7.Click Scan. The original is scanned, attached to a new e-mail message, and sent automatically.

If no e-mail recipient is entered on the E-mailtab, the original is scanned and attached to a new e-mail message, but is not sent. You can then enter an e-mail recipient, add text or other attachments, and then send the message.

The options that you set in step 6 are for the current job only, unless you save them as a Quick Set.

To scan to a file

1.Adjust the automatic document feeder (ADF) media lever to accommodate either a single sheet or a stack of media. (For more information, see Loading originals to scan.

2.Load the originals that are to be scanned face-down in the ADF, with the top of the document leading into the device. Adjust the media guides to hold the originals in place.

ENWW Scanning by using hp LaserJet Scan software 61