Note

Note

Note

The phone line sounds for outgoing faxes.

The ring volume for incoming faxes.

To change the alarm volume

The alarm sounds when the device is presenting an alert or critical error message. The alarm duration length is either one or three seconds, depending on the type of error.

1.Press MENU/ENTER.

2.Use the < or the > button to select Common settings, and then press MENU/ENTER.

3.Use the < or the > button to select Volume settings, and then press MENU/ENTER.

4.Press MENU/ENTER to select Alarm volume.

5.Use the < or the > button to select Off, Soft, Medium, or Loud.

6.Press MENU/ENTER to save your selection.

The factory-set default for the alarm volume is Soft.

To change the volume for the fax

This setting determines the volume of various fax sounds that occur when the device is sending or receiving fax jobs.

1.Press MENU/ENTER.

2.Use the < or the > button to select Common settings, and then press MENU/ENTER.

3.Use the < or the > button to select Volume settings, and then press MENU/ENTER.

4.Use the < or the > button to select PhoneLine Volume, and then press MENU/ENTER.

5.Use the < or the > button to select Off, Soft, Medium, or Loud.

6.Press MENU/ENTER to save your selection.

The factory-set default is Soft.

To change the ring volume of the fax

The fax ring sounds when the device is initially sending or receiving a call. The ring duration length depends on the local telecom ring-pattern length.

1.Press MENU/ENTER.

2.Use the < or the > button to select Common settings, and then press MENU/ENTER.

3.Use the < or the > button to select Volume settings, and then press MENU/ENTER.

4.Press the < or the > button once to select Ring volume, and then press MENU/ENTER.

5.Use the < or the > button to select Off, Soft, Medium, or Loud.

6.Press MENU/ENTER to save your selection.

The factory-set default is Soft.

ENWW

Using the device control panel 15

Page 25
Image 25
HP 3015 manual To change the alarm volume, To change the volume for the fax, To change the ring volume of the fax