Media jams occur in the printer

Note

CAUTION

Occasionally, media becomes jammed during a print job. Try the following remedies before you attempt to clear the jam:

Make sure that you are printing on media that meets HP specifications. See Device media specifications for more information.

Make sure that you are printing on media that is not wrinkled, folded, or damaged.

Make sure that the device is clean. See Cleaning the media path for more information.

Make sure that the input trays are loaded properly and are not too full. See the start guide for more information about loading input trays.

When you add new media, always remove all of the media from the input tray and straighten the stack of new media. This helps prevent multiple sheets of media from feeding through the device at one time, which reduces media jams.

You are notified of a media jam by an error in the software program and a jam message on the device control panel display. See Device control panel error messages appear for more information.

It is not necessary to remove the media input tray to clear a media jam. Remove the media input tray only to return the device for hardware service. For information about removing the media input tray, see To remove the media input tray.

CAUTION

To clear a media jam

Media jams might result in loose toner on the page. If you get any toner on your clothes, wash them in cold water. Hot water will permanently set the toner into the fabric. If you get any toner on your hands, wash them in cold water.

Do not use a sharp object, such as a pencil or scissors, to remove jammed media.

ENWW

Media jams occur in the printer 85

Page 95
Image 95
HP 3015 manual Media jams occur in the printer, To clear a media jam