ADVANCED FUNCTIONS
It isn’t possible to “edit” a command within a macro. However, you may erase the macro as follows:
1.Simultaneously press and hold the Mute Button and the Macro Button containing the macro until the LED flashes.
2.Press the Surround Button to erase the macro.
Resetting the Remote
To reset the remote to its factory defaults, enter Program mode by simultaneously pressing and holding any Input Selector and the Mute Button. When the LED flashes, enter the code “333”. When the LED goes out, the remote will have been fully reset.
Processor Reset
There may be instances where you wish to fully reset the AVR 145 to its factory defaults, or the unit may behave erratically after a power surge.
For erratic behavior, we recommend you try turning the Master Power Switch off and unplugging the AC Power Cord for at least three minutes. Try plugging the cord back in and turning the receiver back on. If this doesn’t work, you may want to try a system reset.
NOTE: A system reset erases all user configurations, including speaker and level settings and tuner presets. After a reset, you will need to
To reset the AVR 145, place the receiver in Standby mode (press the
If the receiver still does not function correctly after a processor reset, contact an authorized Harman Kardon service center for assistance. Service centers may be located by visiting our Web site at www. harmankardon.com.
Memory
If the AVR 145 is unplugged or experiences a power outage, it will retain user settings for up to four weeks.
44
