INSTALLATION

Insert the batteries as shown in the diagram, making sure to observe the correct polarity.

Figure 29 – Remote Battery Compartment

When using the remote, remember to point the lens toward the front panel of the AVR 145. Make sure no objects, such as furniture, are blocking the remote’s path to the receiver. Bright lights, fluorescent lights and plasma video displays may interfere with the remote’s functioning. The remote has a range of about 20 feet, depending on the lighting conditions. It may be used at an angle of up to 30 degrees to either side of the AVR.

If the remote seems to operate intermittently, or if pressing a button on the remote does not cause the AVR Selector or one of the Input Selectors to light up, then make sure the batteries have been inserted correctly, or replace all three batteries with fresh ones.

Step Eight – Program Sources Into the Remote

The AVR 145 remote is capable of controlling not only the receiver, but it may also be programmed to control many brands and models of VCRs, DVD players, CD players, cable boxes, satellite receivers, cassette decks and TVs, as well as The Bridge.

It may help to think of the remote as a book with pages. Each page rep- resents the button functions for a different device. In order to access the functions for a particular device, you first need to turn to that page. This is done by pressing the AVR Button to access the codes that control the receiver, or the Input Selector buttons to access the codes for the devices programmed into the remote.

At the factory, the AVR 145’s codes and the codes to control an iPod docked in The Bridge are preprogrammed, and the codes for many Harman Kardon DVD and CD players are also preprogrammed. If you have other source devices in your system, follow these steps to pro- gram the correct codes into the remote.

1.Using the codes in Tables A9–A16 of the Appendix, look up the product type (e.g. DVD, cable TV box) and the brand name of your source. The number(s) listed are potential candidates for the correct code set for your particular device.

2.Turn on your source device.

3.Put the remote into Program mode by pressing and holding the Input Selector and the Mute button simultaneously until the LED on the remote starts to flash, and then releasing the buttons.

Figure 30 – Input Selectors

4.Enter a code from Step 1 above.

a)If the device turns off, then press the Input Selector again to accept the code, which will flash. The remote will exit the Program mode.

b)If the device does not turn off, try entering another code. If you run out of codes, you may search through all of the codes in the remote’s library for that product type by pressing the ⁄ or ¤ button repeatedly until the device turns off. When the device turns off, enter the code by pressing the Input Selector, which will flash. The remote then exits Program mode.

5.Once you have accepted a code, it’s a good idea to try using some other functions to control the device. Sometimes manufacturers use the same Power code for several different models, while other codes will vary. You may wish to repeat this process until you’ve pro- grammed a satisfactory code set that operates most of the functions you frequently use.

6.You may find out which code number you have programmed by pressing and holding the Input Selector and Mute Button simultane- ously to enter the Program mode. Then press the Set Button, and the LED will blink in the code sequence. One blink represents “1”, two blinks for “2”, and so forth. A series of many fast blinks represents “0”. Record the codes programmed for each device here.

Source Input

Product Type

Remote Control Code

 

(circle one)

 

 

 

 

Video 1

VCR, PVR

 

 

 

 

Video 2

Cable, Satellite

 

 

 

 

Video 3

TV

 

 

 

 

DVD

DVD

 

 

 

 

CD

CD, CDR

 

 

 

 

Tape

Cassette

 

Table 3 – Remote Control Codes

If you are unable to locate a code set that correctly operates your source device, it will not be possible to use the AVR remote to control that device. However, you may still connect the source to the AVR 145 and operate it using the device’s original remote control. Alternatively, you may wish to consider purchasing Harman Kardon’s optional TC 30 activity-based remote, which is programmed by accessing a large data- base of product codes on the Internet. The TC 30 is also capable of “learning” codes from your device’s original remote.

23

Page 22 Page 24
Page 23
Image 23
Harman-Kardon AVR 145 owner manual Turn on your source device, Enter a code from above, Tape Cassette
Page 22 Page 24

AVR 145 specifications

The Harman-Kardon AVR 145 is a compact yet powerful audio/video receiver designed to deliver an exceptional home theater experience. Launched to meet the needs of both music enthusiasts and movie lovers, the AVR 145 combines advanced technology with user-friendly features, making it a popular choice for those seeking quality sound and versatility.

One of the standout features of the AVR 145 is its impressive power output. The receiver delivers up to 50 watts per channel at 8 ohms, allowing it to produce rich and immersive audio across various media formats. This output ensures that even the most bass-heavy soundtracks and delicate dialogue are rendered with clarity and precision, enhancing the overall listening experience.

Harman-Kardon is known for its commitment to quality sound, and the AVR 145 is no exception. It supports multiple audio formats, including Dolby Digital and DTS, which provide surround sound capabilities that make movies feel like a cinematic experience at home. The receiver also includes High Definition Multimedia Interface (HDMI) inputs, supporting high-resolution video signals while simplifying connectivity between devices.

In terms of connectivity, the AVR 145 is equipped with several inputs and outputs, allowing users to connect multiple audio and video sources. It features composite video, component video, and multiple optical and coaxial digital audio inputs, making it compatible with various devices such as DVD players, game consoles, and media streaming devices. This versatility ensures that users can easily integrate the AVR 145 into their existing entertainment systems.

The user interface of the AVR 145 is thoughtfully designed, making it easy for users to navigate through settings and inputs. The built-in on-screen display offers a straightforward setup experience, and the remote control is intuitive for effortless operation. Additionally, the receiver includes a stereo mode for those who prefer a two-channel audio experience, catering to both modern surround sound setups and traditional stereo configurations.

Another notable characteristic of the AVR 145 is its compact design. With a sleek and elegant appearance, it fits seamlessly into any home entertainment setup without taking up excessive space. This aesthetic appeal, combined with its robust performance, positions the AVR 145 as a brilliant choice for anyone looking to enhance their audio experience without the bulk.

In summary, the Harman-Kardon AVR 145 stands out as a remarkable A/V receiver that combines powerful performance, versatile connectivity, and user-friendly design. Whether for movies, music, or gaming, it is an excellent addition to any home theater system, providing a reliable and high-quality audio experience for years to come.
Top Page Image Contents