Cisco Systems OL-7029-01 manual Match protocol http retcode return code map submode, Action count

Chapter 2 Content Switching Module with SSL Commands

match protocol http retcode (return code map submode)

match protocol http retcode (return code map submode)

To specify return code thresholds, count and log return codes, and send syslog messages for return code events received from the servers, use the match protocol http retcode command in SLB return code map configuration submode. To remove the return code thresholds, use the no form of this command.

match protocol http retcode min max action {count log remove} threshold [reset seconds]

no match protocol http retcode min max

Syntax Description	min max	Minimum and maximum range of return codes used to perform a
		count, log, or remove action.
	action count	Increments the statistics of the number of occurrences of return codes
		received.
	action log	Specifies where syslog messages are sent when a threshold is
		reached.
	action remove	Specifies where the syslog messages are sent when a threshold is
		reached and the server is removed from service.
	threshold	The number of return occurrences before the log or remove action is
		taken.
	reset seconds	(Optional) Number of seconds to wait before the processing can
		resume.
Defaults	This command has no default settings.
Command Modes	SLB return code map configuration submode
Command History	Release	Modification
	CSM release 2.2(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
	The threshold and reset values are not configurable for the count action. These commands only are
Usage Guidelines
	available for the log and remove actions.
Examples	This example shows how to specify return codes values to search for in an HTTP request:
	Cat6k-2(config-slb-map-retcode)#match protocol http retcode 30 50 action log 400 reset 30
	map retcode (SLB policy configuration submode)
Related Commands

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

2-32 OL-7029-01