Cisco Systems OL-7029-01 manual Serverfarm serverfarm-name No serverfarm serverfarm-name

Chapter 2 Content Switching Module with SSL Commands

serverfarm

serverfarm

To identify a server farm, and then enter the serverfarm configuration submode, use the serverfarm command. To remove the server farm from the configuration, use the no form of this command.

serverfarm serverfarm-name

no serverfarm serverfarm-name

Syntax Description	serverfarm-name	Character string used to identify the server farm; the character string
		is limited to 15 characters.
Defaults	This command has no default settings.
Command Modes	Module CSM configuration submode
Command History	Release	Modification
	CSM release 1.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.

Usage Guidelines

Examples

Related Commands

Use this command to enter the server farm configuration submode to configure the load-balancing algorithm (predictor), a set of real servers, and the attributes (NAT, probe, and bindings) of the real servers.

This example shows how to identify a server farm named PUBLIC and change the CLI to server farm configuration mode:

Cat6k-2(config-module-csm)# serverfarm PUBLIC

script task

serverfarm (policy submode) show module csm serverfarm

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

2-96 OL-7029-01