Manuals / Pioneer / Home Audio / CD Player

Pioneer FH-P8900MD Understanding built-in CD player error messages, Display Cause Remedy

Models: FH-P8900MD

1 60

Download 60 pages 29.63 Kb

Page 48

Additional Information

Understanding built-in CD player error messages

When problems occur during CD play, an error message may appear on the display. If an error mes- sage appears on the display, refer to the table below to see what the problem is and the suggested method of correcting the problem. If the error cannot be corrected, contact your dealer or your near- est Pioneer service center.

Display	Cause	Remedy
ERROR- 11, 12, 17, 30	Dirty disc.	Clean disc.

ERROR- 11, 12, 17, 30	Scratched disc.	Replace disc.

ERROR- 14	Unrecorded disc.	Check the disc.

ERROR- 10, 11, 12, 14,	Electrical or mechanical	Turn the ignition ON and OFF, or
17, 30, A0	problem.	switch to a different source, then
		back to the CD player.

ERROR- 44	All tracks are skip tracks.	Replace disc.

HEAT	CD player overheated.	Turn off the CD player and wait
		until the CD player cools down.

Understanding built-in MD player error messages

When problems occur during MD play, an error message may appear on the display. If an error mes- sage appears on the display, refer to the table below to see what the problem is and the suggested method of correcting the problem. If the error cannot be corrected, contact your dealer or your near- est Pioneer service center.

Display	Cause	Remedy
BLANK DISC	Blank disc is inserted.	Replace disc.

TEMP	MD player overheating.	Discontinue play until the machine
	temperature drops.

ERROR- 11, 12, 17, 30	Dirty disc.	Clean disc.

ERROR- 11, 12, 17, 30	Scratched disc.	Replace disc.

ERROR- 01, 11, 12, 17,	Electrical or mechanical	Turn the ignition ON and OFF, or
30, A0	problem.	switch to a different source, the
		back to the MD player.

ERROR- 20, 21	Track information cannot be	Reload the MD.
	read.

ERROR- 20, 21, 24	There is something wrong with	Replace disc.
	the MD.

ERROR- 23	The MD contains recorded	Replace disc.
	information other than music.

ERROR- A1	Electrical or mechanical	Press RESET.
	problem.

ERROR-	MD play not possible.	Replace the MD with another disc,
		or press RESET.

47

Image 48

Pioneer FH-P8900MD Understanding built-in CD player error messages, Understanding built-in MD player error messages

Contents

FH-P8900MD Contents Selecting channels from the preset Understanding built-in CD player errorUnderstanding built-in MD player error Understanding auto-equalizing errorRemote Controller VolumeKey Finder Head unitPrecaution About this manualPlayback of MDs featuring long recordings Resetting the microprocessor About the demo modeReverse mode Feature demoRemote controller and care BatteriesUsing the remote controller Press Audio to select the desired modeSetting the display angle Basic OperationTurning a source on or off AUX Ô Source OFFSwitching the function of the multi-func- tion buttons Soft KEY operationExample of multi-function button opera- tion Press Next to display FuncPress Next repeatedly until Func appears Press Func to enter the function menuKey guidance indicator PGM button functionsSource Function name Display and indicators TunerBasic operation Press up or down Source to select the tunerStoring and recalling broadcast stations Tuner function menuStoring the strongest broadcast stations Storing broadcast stationsTuning in strong signals Selecting stations from the pre- set channel listPress any of the buttons 1 6 to recall the desired station Built-in CD Player Press CD Eject to eject the CDFront panel opens and the CD is ejected Switching and scrolling the title Repeating playBuilt-in CD player function menu Button OperationPlaying tracks in random order Scanning tracks of a CDSelecting tracks from the track title list Press Next until the desired track title appearsPausing CD playback Entering disc titlesPause lets you temporarily stop playback of the CD Built-in MD Player Press MD Eject to open the front panelPress MD Eject to eject the MD Front panel opens and the MD is ejectedBuilt-in MD player function menu Scrolls the displayed titleScanning tracks of an MD Pausing MD playback Pause lets you temporarily stop playback of the MDMulti-CD Player Disc multi-CD playerSelecting a disc directly Press up or down Source to select the multi-CD playerMulti-CD player function menu Multi-CD player function menu has the fol- lowing functionsScanning CDs and tracks Select the repeat rangeRefer to Repeating play on Press ABC to switch the character mode Press 5 or ∞ to select letters, numbers and symbolsSelecting discs from the disc title list Press 5 or ∞ to play a disc you want to enter the titleUsing compression and dynamic bass emphasis Using ITS memoryProgramming tracks in ITS memory Playback from ITS memory Erasing a track from ITS memoryErasing a CD from ITS memory Press ITS.P to turn ITS play onQBand WPreset number eChannel TV TunerChanging a band TV tuner function menuSelecting channels from the pre- set channel list TV tuner function menu has the following functionsAudio Adjustments Adjusting the audio easilyAdjusting the audio finely Extra functionsUsing balance adjustment Using loudnessPress 2 or 3 to adjust left/right speaker balance Audio menuAdjusting equalizer curves Adjusting 13-band graphic equal- izerSwitching the octaver setting Adjusting BBE sound levelUsing position selector Recall the equalizer curve you want to adjustPress 5 or ∞ to adjust the level of the equalizer band Button PositionUsing time alignment Using subwoofer outputAdjusting time alignment Button Type of carUsing the high pass filter Adjusting subwoofer settingsSetting the high pass filter for front speakers Setting the high pass filter for rear speakersAdjusting source levels Using the auto-equalizerSwitching the digital attenuator Creating the auto-equalizer curveBefore operating the auto-equalization function Carrying out auto-equalizingTurn the ignition switch to on or ACC Press up or down Source to turn the source offInitial Settings Initial settings menuUsing reverse mode Using the feature demoSetting preout output Setting the FM tuning stepSetting the AM tuning step Button Tuning stepAttenuating volume Displaying and setting the clockOther Functions Adjusting the brightness Switching the dimmer settingSetting the entertainment display Changing the display formUsing the AUX source Setting the background still pictureSelecting AUX as the source Entering the AUX titleAdditional Information CD player and careCD-R and CD-RW discs MD player and care English Español Deutsch FrançaisUnderstanding built-in CD player error messages Understanding built-in MD player error messagesDisplay Cause Remedy Understanding auto-equalizing error messages Error Check MICError Check Speaker Error Check SystemConnecting the units Colors correctlyACC position Same functionConnection Diagram English Español Installation Do not close this areaInstallation using the screw holes on the side of the unit ScrewFactory radio mounting bracket Specifications English Español Deutsch Français Italiano Nederlands Page Page Meguro 1-CHOME, MEGURO-KU, Tokyo 153-8654, Japan KICFF/01C00001