1.Press ENT and BG and then press BGV to select the background visual mode.

2.Press any of the buttons BGV1 – BGV5 to select the desired visual.

Setting the background still picture

The background still pictures are only for the display form 1 “FORM 1”. There are three stored background still pictures to select from.

When you select “FORM 2”, “BG” is not dis- played and this mode is inactive.

1.Press ENT and BG and then press BGP to select the background still picture mode.

2.Press any of the buttons BGP1 – BGP3 to select the desired picture.

Canceling the entertainment display

You can cancel the entertainment display (the movie screens, the spectrum analyzer displays, etc.).

Press ENT and then press OFF to cancel the entertainment display.

Using the AUX source

An IP-BUS-RCA interconnector such as the CD-RB20 or CD-RB10 (sold separately) lets you connect this product to auxiliary equipment featuring RCA output. For more details, refer to the IP-BUS-RCA interconnector’s owner’s man- ual.

Selecting AUX as the source

Press (up or down) SOURCE to select AUX as the source.

Press (up or down) SOURCE until “AUX” appears.

Entering the AUX title

The title displayed for the AUX source can be changed.

1.Press (up or down) SOURCE to select AUX as the source.

Press (up or down) SOURCE until “AUX” appears.

2.Press FUNC and then press TTLin to select the AUX title input mode.

Refer to “Entering disc titles” on page 26, and perform procedures 3 to 7 in the same way.

Note:

Even if you do not press TTLin you can enter the title, but you will not be able to change the charac- ter types.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

44

Page 45
Image 45
Pioneer FH-P8900MD operation manual Using the AUX source, Setting the background still picture, Selecting AUX as the source