Pioneer FH-P8900MD operation manual Using compression and dynamic bass emphasis, Using ITS memory

Multi-CD Player

5.Press 3 to move the cursor to the next character position.

• Press 2 to move backwards in the display.

6.Press 3 to move the cursor to the last position and then press 3 one more time after entering the title.

7.Press BAND to cancel the disc title input mode.

Note:

•When playing a CD TEXT disc on a CD TEXT com- patible multi-CD player, if you switch to this mode, “No title input” is displayed and you cannot input the title.

•Titles remain in memory even after the disc has been removed from the magazine, and are recalled when the disc is reinserted.

•After the titles for 100 discs have been entered, the data for a new disc will overwrite the oldest one.

Using compression and dynamic bass emphasis

Using the COMP (compression) and DBE (dynamic bass emphasis) functions enables multi-CD player sound quality adjustment. Each of the functions enables two-step adjustment. The COMP function adjusts imbalances between loud and subdued sounds at higher volumes.

DBE boosts bass levels to give a fuller sound.

1.Press FUNC and NEXT and then press COMP to select the compression and dynamic bass emphasis mode.

2.Press COMP to select the desired setting.

Press COMP repeatedly to switch between the following settings:

COMP OFF = COMP 1 = COMP 2

=COMP OFF = DBE 1 = DBE 2

•When this mode is exited except for “COMP OFF” is selected, “COMP” appears on the basic display.

Note:

•If the multi-CD player does not support these func- tions, “No COMP” is displayed when you attempt to select it.

Using ITS memory

The ITS (instant track selection) lets you make a program of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the ITS memory, you can turn on ITS play and play just those selections.

Programming tracks in ITS memory

You can use ITS to enter and play back up to 24 tracks per disc for up to 100 discs (with the disc title).

1.Press 5 or ∞ to play the CD you want to program.

2.Press FUNC and NEXT and then press ITS.M to select the ITS memory mode.

3.Press 2 or 3 to select the desired track.

4.Press MEMO to store the currently play- ing track in the ITS memory.

“Memory complete” is displayed briefly and the currently playing track is added to ITS memory.

5.Press BAND to cancel the ITS memory mode.

Note:

•In this mode, you can also use 5 to store the cur- rently playing track in the ITS memory.

•After 100 discs have been programmed, the data for a new disc will overwrite the oldest one.

27