Recalling broadcast stations
1.Press NEXT to display “1” – “6” (or “7” – “12”.
Press NEXT until “1” – “6” (or “7” – “12”) appears.
2.Press any of the buttons 1 – 6 (or 7 – 12) to recall the station preset under that but- ton.
Note:
•You can also use 5 or ∞ to recall broadcast sta- tions memorized under the buttons 1 – 12.
Changing a band
•Press BAND to select the desired band.
Press BAND repeatedly to switch between the following bands:
TV 1 = TV 2
TV tuner function menu
The TV tuner function menu has the following functions:
qw
qBSSM (best stations sequential memory)
Press BSSM repeatedly to turn BSSM on or off.
When finished, the display switches to the preset channel list mode.
wchLIST (preset channel list)
For operation of the preset channel list, refer to “Selecting channels from the preset chan- nel list” on this page.
Note:
•If you do not operate the function within about 30 seconds, the display is automatically returned.
•You can also turn BSSM off by pressing PGM.
Selecting channels from the pre- set channel list
The preset channel list lets you see the list of preset channels and select one of them to receive.
1.Press FUNC and then press chLIST to select the preset channel list mode.
2.Press NEXT to switch between “1” – “6” and “7” – “12”.
3.Press any of the buttons 1 – 6 (7 – 12) to recall the desired channel.
Note:
•You can also use 2, 3 and 5 to select and recall the desired channel.
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
30
