Before Using This Product

Using the remote controller

This product is equipped with a remote con- troller for convenient operation.

Point the remote controller in the direction of the front panel to operate.

Precaution:

Do not store the remote controller in high tempera- tures or direct sunlight.

The remote controller may not function properly in direct sunlight.

Do not let the remote controller fall onto the floor, where it may become jammed under the brake or accelerator pedal.

If you press the FUNCTION button on the remote controller while pressing the BAND button on it, the remote controller will not function properly. To can- cel this setting, press the AUDIO button on the remote controller while pressing the BAND button on it to return to the previous setting.

FUNCTION button and AUDIO button

Operation of the FUNCTION button and the AUDIO button on the remote controller differs from the operation of the FUNC button and the AUDIO button on the head unit. When operat- ing the head unit, use the FUNC button and the AUDIO button to select the appropriate menu, then use the multi-function buttons to select the mode. When operating the remote controller, however, switch through the modes as described below to select the mode.

FUNCTION button operation

Press FUNCTION to select the desired mode (e.g., built-in CD player).

Press FUNCTION repeatedly to switch between the following modes:

RPT = RDM = SCAN = T.LIST = PAUSE = TTLin

Note:

Refer to “Built-in CD player function menu” on page 16.

AUDIO button operation

Press AUDIO to select the desired mode.

Press AUDIO repeatedly to switch between the following modes:

F/B = LOUD = SFC = EQ1 = EQ2

=POSI = T.AL1 = T.AL2 = SW1

=SW2 = HPF F = HPF R = SLA

=A.EQ = D.ATT

Note:

• Refer to “Audio menu” on page 32.

7

Page 8
Image 8
Pioneer FH-P8900MD operation manual Using the remote controller, Press Audio to select the desired mode