Installation using the screw holes on the side of the unit
Fastening the unit to the factory radio mounting bracket. (Fig. 5) (Fig. 6)
Select a position where the screw holes of the bracket and the screw holes of the head unit become aligned (are fit- ted), and tighten the screws at 3 or 4 places on each side. Use either binding screws (5 ⋅ 6 mm) or flush surface screws (5 ⋅ 6 mm), depending on the shape of the screw holes in the bracket.
Fig. 5
If the pawl gets in the way, bend it down.
Screw
Be sure to use the screws supplied with this product.
Factory radio mounting bracket | Dashboard or Console |
Fig. 6
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
54