Audio Adjustments
Using time alignment
The time alignment lets you adjust the distance between each speaker and the listening posi- tion to match the type of car. There are five types of car stored which you can easily recall at any time.
1.Press AUDIO and NEXT and then press T.AL1 to select the time alignment mode.
2.Press the corresponding button to select the type of car.
Button | Type of car |
SEDAN | Sedan |
|
|
WAGON | Wagon |
|
|
M.VAN | Mini van |
|
|
SUV | Sports utility vehicle |
|
|
CUSTM | Custom |
|
|
•“Custom” is an adjusted time alignment that you can create for yourself.
Adjusting time alignment
For “Custom” time alignment, you can adjust the distance between each speaker and the selected position.
1.Press AUDIO and NEXT and then press T.AL2 to select the time alignment adjust- ment mode.
2.Press the corresponding button to select a unit of distance.
Button | Unit of distance |
cm Centimeter
inch Inch
3.Press 2 or 3 to select the speaker to be adjusted.
Each press of 2 or 3 selects speakers in the following order:
Front Left (front left) Ô Front Right (front right) Ô Rear Right (rear right) Ô Rear Left (rear left) Ô Sub. W (subwoofer)
•You cannot select “SUB.W” when the sub- woofer output is off.
•You cannot select “Sub. W” when you select “REAR” in the preout output setting mode (refer to page 41).
4.Press 5 or ∞ to adjust the distance between the selected speaker and the lis- tening position.
Each press of 5 or ∞ increases or decreas- es the distance.
•“400.0cm” – “0.0cm” is displayed as the distance is increased or decreased, if you have selected centimeters (cm).
•“160inch” – “0inch” is displayed as the dis- tance is increased or decreased, if you have selected inches.
•You can adjust the distance for the other speakers in the same way.
Note:
•“T.AL2” is not displayed when neither “FL” or “FR” is selected in the position selector mode (POSI). If “FL” or “FR” is not selected, “T.AL2” is inactive.
Using subwoofer output
This product is equipped with a subwoofer out- put which can be switched on or off. When a subwoofer is connected to this product, turn the subwoofer output on.
The subwoofer output phase can be switched between normal and reverse.
1.Press AUDIO and NEXT and then press SW1 to select the subwoofer output mode.
2.Press SW1 to turn the subwoofer output on.
“SUB. W ON” appears in the display.
•Press SW1 again to turn subwoofer output off.
3.Press 2 or 3 to select the subwoofer output phase.
Press 2 to select reverse phase. Press 3 to select normal phase.
35