Installation
9. Adjust the door springs
^Open the dishwasher door halfway.
If the door remains in this position when released, the springs are adjusted correctly.
If the door drops, the tension on the springs needs to be increased.
If it closes on its own, the tension on the springs need to be decreased.
^ To adjust the door springs use a T20 Torx or a small slotted screwdriver and turn the screw located behind the door in the upper front strip, on the left hand side of the dishwasher. Do not use a power screwdriver.
– turn clockwise to increase the tension
– turn counterclockwise to
decrease the tension.
Note:
If the door springs can not be adjusted enough (the door falls), the custom door panel is too heavy.
Call your Miele dealer or the Technical Service Department for advice on stronger door springs.
25
