Installation |
^Carefully open the dishwasher door until it hits the toekick.
^Using the front lower edge of the door panel as a guide, draw a line across the toekick.
^Unscrew and remove the toekick.
^If one of the cutting lines is close to the line just drawn, score the front of the toekick, and snap off the excess, otherwise, trim the toekick along the line using a saw.
^Screw the toekick back onto the brackets, with the cut edge at the bottom.
After installation, carefully open the dishwasher door to check that the front panel does not hit the toekick. If it does, remove the toekick and trim it accordingly.
36
