Installation
^Place the bracket on the door panel so the notches, a, cross the previously drawn centerline, and the bottom of the bracket lines up with the horizontal X line.
^Mark and drill pilot holes for the screws using a 3/32" (2.5 mm) drill bit.
^Attach the bracket to the back of the panel, using the 14 screws provided. The top four pair of holes, only need to be secured once per pair.
^Double check the location of the bracket before mounting the panel to the dishwasher.
The door handle must be installed on the panel before it is attached to the machine. It should be located in the center of the panel at a height that will match the surrounding drawer handles.
Any screws used to attach the door handle must be countersunk so that the rear of the front panel remains flat.
20
