Audio Adjustments
Adjusting the audio easily
The following functions let you easily adjust your audio system to match the car interior acoustic characteristics which vary depending on the type of car.
•Recalling equalizer curves (EEQ)
•Using position selector (POSI)
•Using time alignment (T.AL1)
•Adjusting equalizer curves (EQ1)
Adjusting the audio finely
By carrying out the following settings/adjust- ments in order, you can create a
•Using position selector (POSI)
•Using time alignment (T.AL1)
•Adjusting time alignment (T.AL2)
•Using subwoofer output (SW1)
•Adjusting subwoofer settings (SW2)
•Setting the high pass filter for front speakers (HPF F)
•Setting the high pass filter for rear speakers (HPF R)
•Using balance adjustment (F/B)
•Creating the
•Recalling equalizer curves (EEQ)
•Adjusting equalizer curves (EQ1)
•Adjusting
Extra functions
These functions are helpful in adjusting the sound to suit your system or your personal pref- erences.
•Using loudness (LOUD)
•Using sound field control, octaver and BBE sound (SFC)
•Adjusting source levels (SLA)
•Switching the digital attenuator (D.ATT)
Recalling equalizer curves
The graphic equalizer lets you adjust equaliza- tion to match the car interior acoustic character- istics as desired. There are seven stored equal- izer curves which you can easily recall at any time.
1.Press EEQ to switch to the easy equalizer mode.
2.Press NEXT to switch between “CSTM2” and the other selections (curves).
3.Press the corresponding button to select the desired equalizer curve.
Button | Equalizer curve |
S.BASS | Super bass |
|
|
PWRFL | Powerful |
|
|
NATRL | Natural |
|
|
VOCAL | Vocal |
|
|
FLAT | Flat |
|
|
CSTM1 | Custom1 |
|
|
CSTM2 | Custom2 |
|
|
•“CUSTOM1” and “CUSTOM2” are adjusted equalizer curves that you can create for yourself. (Refer to “Adjusting
•When “FLAT” is selected the equalizer makes no supplement or correction to the sound. This is useful for checking the effect of the equalizer curves by switching alternatively between “FLAT” and a set equalizer curve.
Note:
•You can also use 2 and 3 to select the desired equalizer curve.
•If you do not operate the function within about eight seconds, the display is automatically returned.
31
