Panasonic PT-D10000U, DW10000U manual Setting the date and time, Press to select Date and Time

Note

•The air filter cleaning monitor (FILTER CLEANING) will flash blue while cleaning of the air filter is in progress. If there is a problem with the air filter, the air filter cleaning monitor (FILTER CLEANING) will light red.

•The time taken for cleaning is approximately 30 to 40 seconds.

•The setting time will be the local time. (p. 81)

•Automatic cleaning will not be carried out if the projector is in standby mode.

•If the projector is not in projection mode when the setting time is reached, automatic cleaning will not be carried out.

•Automatic cleaning will not be carried out if 24 hours have not yet elapsed since cleaning was last carried out (either by automatic cleaning or forced cleaning).

Example: If the setting time is 7:00 and forced cleaning is carried out at 9:00, then automatic cleaning will not be carried out at 7:00 on the following day.

			46 hours elapsed
		22 hours elapsed
Setting time			Setting time	Setting time
Automatic	Forced		(No cleaning)	Automatic
cleaning	cleaning			cleaning

•If the time is set to a time which is within 24 hours from the last time cleaning was carried out, automatic cleaning will not be carried out the next time the setting time is reached. Instead, cleaning will be carried out when the setting time is reached on the following day.

Example: If cleaning was carried out at 10:00, and the cleaning time setting is then changed to 20:00, automatic cleaning will be carried out at 20:00 on the following day.

34 hours elapsed

		10 hours elapsed
Setting time			Setting time	Setting time
	Automatic		(No cleaning)	Automatic
cleaning				cleaning

Time reset

•When projection starts (when the power is turned on), automatic cleaning will be carried out immediately if more than 24 hours have elapsed since cleaning was last carried out.

Setting the date and time

This lets you set the time zone and the current date and time for the projector’s internal clock.

1.Press ▲▼ to select “DATE AND TIME”.

OPTION2

PROJECTOR ID	2
INSTALLATION	FRONT-F
ALTITUDE	LOW
DIRECTION	H
LAMP SELECT	QUAD
LAMP RELAY	OFF
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO	LOGO1
PASSWORD

MENU SELECT

ENTER SUB MENU

2.Press ENTER.

•The “DATE AND TIME” screen will be displayed.

DATE AND TIME

TIME ZONE	09:00
ADJUST CLOCK
LOCAL DATE	2007/01/01
LOCAL TIME	12:34:56
MENU SELECT
CHANGE

3.Press ▲▼ to select “TIME ZONE”.

4.Press ◄► to switch “TIME ZONE”.

5.Press ▲▼ to select “ADJUST CLOCK”.

6.Press ENTER.

•The “ADJUST CLOCK” screen will be displayed.

ADJUST CLOCK

YEAR	2007
MONTH	1
DAY	1
HOUR	12
MINUTE	34
APPLY

MENU SELECT

CHANGE

7.Press ▲▼ to select the item to be set, and use ◄► to set the local time.

8.Use ▲▼ to select “APPLY”, and then press ENTER.

• This completes setting of the time.

Special Features

ENGLISH – 81