Panasonic DW10000U, PT-D10000U manual Adjusting the feet, Projection scheme, Installation geometry

Installation (continued)

Adjusting the feet

The four adjustable feet mounted at the bottom of the projector are level-adjustable (0 mm–15 mm) which can be used when the floor surface is not horizontal.

(Front)(Rear)

Projection scheme

This projector can use any of the four projection schemes. Select the most suitable scheme to the situation of your location. Use the OPTION menu on the menu screen to choose the desired projection scheme. (p. 76)

Floor Ceiling

Front

Rear

Installation geometry

When planning the projector and screen geometry, refer to the figures below and the information on the next page for reference. After the projector is roughly positioned, picture size and vertical picture positioning can be finely adjusted with the powered zoom lens and lens shifting mechanism.

●When attaching an optional ceiling mount bracket (ET-PKD100H)

Side View	(unit : mm/inch)
	700.5	27.6˝)
H	580.5 -	(22.9˝ -
	L
	254
SH	(10˝)
	L
H
Screen

L:Projection distance SW: Image width

SH: Height of the image H: Vertical distance between the lens Center level and the bottom edge of the projected image

* For PT-D10000U:	H = 0 to SH
For PT-DW10000U:	H = -0.1 × SH to 1.1 × SH

*However, if the ET-D75LE5 has been installed, the value will be fixed at H=SH/2 for both the PT-D10000U and PT-DW10000U. If the ET-D75LE6 has been installed, the values will be H = 0.1 × SH to 0.9 × SH for the PT-D10000U, and H = 0 to SH for the PT-DW10000U.

Top View		(unit : mm/inch)
		200
		(7.9˝)
		66	(2.6˝)
SW	L		120	(4.7˝) 314 (12.4˝)
		L1
		175
		(6.9˝)
	Screen	254
		(10˝)
	Lens	Dimension of L1 (Approx.)
	ET-D75LE1	62.5 (2.5˝)
	ET-D75LE2	47 (1.9˝)
	ET-D75LE3	50.5 (2˝)
	ET-D75LE4	74.4 (2.9˝)
	ET-D75LE5	150.5 (5.9˝)
	ET-D75LE6	160 (6.3˝)
	ET-D75LE8	202.5 (8˝)

20 – ENGLISH