Manuals / LG Electronics / Computer Equipment / Computer Monitor

LG Electronics E2341VG, E2441V manual Install the Wall mount plate, Installing the Wall mount plate

Models: E2341VG E2341V E2241V E2441V

1 28

Download 28 pages 22.36 Kb

Page 27

Image 27

Installing the Wall mount plate

3. Install the Wall mount plate.

Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate.

Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.

<Screw Mounting Interface Dimension>

Hole spacing : 75 mm x 75 mm.

Kensington Security Slot

Connected to a locking cable that can be purchased separately at most computer stores.

NOTE

VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications

Please use VESA standard as below.

*784.8 mm and under (30.9 inch)

-Wall Mount Pad Thickness : 2.6 mm

-Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm

*787.4 mm and above (31.0 inch)

-Please use VESA standard wall mount pad and screws.

Page 27

Image 27

LG Electronics E2341VG Install the Wall mount plate, Installing the Wall mount plate, Screw Mounting Interface Dimension

Contents

Page To Avoid Personal Injury Important PrecautionsOn Safety Do not Open the DisplayImportant Precautions On InstallationImportant Precautions On CleaningOn Repacking On DisposalAccessories Thank for selecting LGE productsUsers Guide/Cards Connecting the stand Connecting the Display2. Place the monitor face Down on the cushion or soft cloth Disassembling the standConnecting the Display 1. Put a cushion or soft cloth on aflat surfaceERGONOMIC After installation, adjust the angle as shown belowPositioning your display Connecting the DisplayB Connect D-subAnalog signal Cable Connecting with the PCConnecting the Display of the signal cable A Connect DVI-DDigital signal CableMENU Button OSD LOCKED/UNLOCKED Control Panel FunctionsFront Panel Controls For D-SUB and DVI input Only for HDMI inputEXIT Button Power IndicatorControl Panel Functions INPUT ButtonPage ENERGY On Screen DisplayOSD Selection and AdjustmentMENU SUPERPage Only HDMI input Page Turn on the SUPER ENERGY SAV- ING function Clear the TOTAL POWER REDUC- TION and TOTAL CO2 REDUCTION valuesSAVING DATAW/h Do you see a CHECK SIGNAL CABLE message on the screen? TroubleshootingCheck the following before calling for service Is the power indicator light on?Troubleshooting Display image is incorrectDisplay Position is incorrect On the screen background, vertical bars or stripes are visibleThe Audio function is not working Have you installed the display driver?Do you see an Unrecognized monitor, Plug&Play VESA DDC monitor found message?TYPE-A TYPE-A TYPE-A PolarityH/V + -/- -/- +/+ +/+ -/- +/+ +/+ +/+ +/+ -/+ +/+1. Place the monitor with its front facing downward on a soft cloth Installing the Wall mount plateKensington Security Slot 3. Install the Wall mount plateInstalling the Wall mount plate Screw Mounting Interface DimensionSERIAL MODEL