Panasonic PT-D10000U, DW10000U manual Large Screen Correction, Target Data screen will be displayed

6.Use the colorimeter to measure the luminance (Y) and chromaticity coordinates (x, y).

7.Press ▲▼ to select the colors, and press ◄► to select their values.

8.After all the data has been input, press MENU.

•The “MEASURE MODE” screen will be displayed.

MEASURE MODE

MODE	709MODE
MEASURED DATA
TARGET DATA
AUTO TESTPATTERN	ON
MENU SELECT
ENTER SUB MENU

■Inputting the coordinates of a desired color

9.Press ▲▼ to select “MODE”.

10.Press ▲▼ to select “7COLORS”.

11.Press ▲▼ to select “TARGET

DATA”.

12.Press ENTER.

• The “TARGET DATA” screen will be displayed.

TARGET DATA

TARGET DATA:R,G,B

TARGET DATA:Cy,Mg,Ye,Wh

MENU SELECT

ENTER SUB MENU

13.Press ▲▼ to select “R, G, B” or “Cy, Mg, Ye, Wh”.

14.Press ENTER.

•The “TARGET DATA: R, G, B (or “Cy, Mg, Ye, Wh”)” screen will be displayed.

TARGET DATA: R, G ,B

R	x	0.670
	y	0.330
G	x	0.650
	y	0.630
B	x	0.150
	y	0.050

MENU SELECT

ADJUST

15.Press ▲▼ to select the desired colors, and press ◄► to input their coordinates.

16.After all the data has been input, press MENU.

Note

•If “3COLORS” or “709MODE” has been selected as the “TARGET MODE” setting, only the 3 colors R, G and B will be input for “TARGET DATA”.

•If “709MODE” has been selected as the “TARGET MODE” setting, the 3 primary colors defined by the ITU-R BT.709 standard will be set as the target data.

•If the target data is outside the color range of the projector, the colors will not be projected correctly.

Large Screen Correction

If watching images close up on a large screen, you can correct the colors that appear lighter on the screen so that they appear the same as the colors that would appear on a normal-sized screen.

1.Press ▲▼ to select “LARGE SCREEN CORRECTION”.

OPTION1

COLOR MATCHING	OFF
LARGE SCREEN CORRECTION	OFF
AUTO SIGNAL	OFF
AUTO SETUP
BACK COLOR	BLUE
DVI EDID	EDID2(PC)
AUX DVI EDID	EDID2(PC)
P IN P	OFF
FUNC1	P IN P
OSD POSITION	2
OSD MEMORY	ON

MENU SELECT

CHANGE

2.Press ◄► to switch “LARGE SCREEN CORRECTION”.

•The setting will change as follows each time ◄► is pressed.

OFF (No correction)		1 (Low)
	2 (High)

Special Features

ENGLISH – 69