Panasonic DW10000U, PT-D10000U manual System information Cleaning the air filter

Option2 settings (continued)

System information		Cleaning the air filter
Displays the system information of the projector.	This can be used to set air filter cleaning.

1.Press ▲▼ to select “SYSTEM INFORMATION”.

OPTION2

PROJECTOR ID	2
INSTALLATION	FRONT-F
ALTITUDE	LOW
DIRECTION	H
LAMP SELECT	QUAD
LAMP RELAY	OFF
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO	LOGO1
PASSWORD

MENU SELECT

ENTER SUB MENU

2.Press ENTER.

•The “SYSTEM INFORMATION” screen will be displayed.

SYSTEM INFORMATION

ROM VERSION	1.00.00
NETWORK VERSION	1.00
SUB VERSION	1.00
PROJECTOR RUNTIME	1000h
LAMP1 RUNTIME	500h
LAMP2 RUNTIME	500h
LAMP3 RUNTIME	500h
LAMP4 RUNTIME	500h

CHANGE

3.Press ◄► to move to the next page.

SYSTEM INFORMATION

ON COUNT
POWER ON TIMES	100
LAMP 1 ON		50
LAMP 2 ON		50
LAMP 3 ON		50
LAMP 4 ON		50
SHUTTER	9(	0)
AIR FILTER CLEANING	3(	0)
AUX	MD77DV:DN
NUMBER OF ENTRY SIGNAL	1/96

CHANGE

1.Press ▲▼ to select “AIR FILTER CLEANING”.

OPTION2

PROJECTOR ID	2
INSTALLATION	FRONT-F
ALTITUDE	LOW
DIRECTION	H
LAMP SELECT	QUAD
LAMP RELAY	OFF
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO	LOGO1
PASSWORD

MENU SELECT

ENTER SUB MENU

2.Press ENTER.

•The “AIR FILTER CLEANING” screen will be displayed.

•You can select the automatic cleaning time (“TIME”) and also force cleaning to be carried out immediately (“EXECUTE”).

AIR FILTER CLEANING

TIME 00:00

EXECUTE

MENU SELECT

CHANGE

3. Press ▲▼ to select “TIME”.
• Select “TIME” and then set the time for
automatic cleaning to be carried out.
• If you would like cleaning to be carried out
straight away, select “EXECUTE” and then
press ENTER.
4. Press ◄► to switch “TIME”.
• The setting will change as follows each time
◄► is pressed.
00:00	23:50
(in units of 10 minutes)
• The default setting is “00:00” (midnight).

Example: When the default setting is in use, automatic cleaning will start at 00:00 if the projector is in projection mode. If the time is set to 7:00, automatic cleaning will start at that time if the projector is in projection mode.

80 – ENGLISH