Panasonic PT-D10000U manual Switching the input signal, Basic Operation Using the Shutter function

Basic operations using the remote control

AUTO

SETUP INPUT

SELECT

SHUTTER

ON	ASPECT
SCREEN

TEST FUNC1 PATTERN

STATUS

LIGHT

Switching the input signal

You can use the remote control to switch the signals that are being input and projected.

1.Press INPUT SELECT on the remote control or the main unit.

•Press RGB1:

Switches to RGB1 input.

•Press RGB2:

Switches to RGB2 input.

•Press DVI-D:

Switches to DVI-D input.

•Press VIDEO: Switches to video input.

•Press S-VIDEO:

Switches to S-VIDEO input.

•Press AUX:

Switches to optional input module input. (The AUX button to switch the input is disabled when an optional input module is not connected.)

Note

•Refer to “Connection” for details on the input terminals. (pp. 25, 26)

Basic Operation

Using the SHUTTER function

If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode is available that allows the user to hide images temporarily.

1.Press SHUTTER on the remote control or the main unit.

•The image is turned off.

2.Press SHUTTER again.

•The image comes back.

On-screen display function

This turns the on-screen display function on and off.

1.Press ON SCREEN on the remote control.

Status function

This shows the projector status. It can also be used to send information about the projector’s status via e-mail.

1.Press STATUS on the remote control.

STATUS

INPUT : RGB1

:0.00kHz/ 0.00Hz PROJECTOR RUNTIME : 13h LAMP1 : 9h/OFF/

LAMP2 : 10h/OFF/

LAMP3 : 9h/OFF/

LAMP4 : 9h/ON/

TEMP : IN- 27 / OUT- 32 /OPT- 36

VERSION MAIN	: 0.55
VERSION NETWORK :		0.09
REMOTE2 : DISABLE

ENTER END STATUS VIA E-MAIL

Note

•Refer to “How to use network function” for details. (pp. 84-97)

ENGLISH – 43