Panasonic PT-D10000U, DW10000U manual Adjusting Tint, Adjusting the color temperature

Adjusting Tint

This adjusts skin tones in the pictures.

1. Press ▲▼ to select “TINT”.

PICTURE

PICTURE MODE	NATURAL
CONTRAST	0
BRIGHTNESS	0
COLOR	10
TINT	1
COLOR TEMP.	DEFAULT
GAMMA	DEFAULT
SHARPNESS	0
NOISE REDUCTION	OFF
DYNAMIC IRIS	OFF
SYSTEM SELECTOR	AUTO 1

MENU SELECT

ADJUST

2.Press ENTER.

•The “TINT” individual adjustment screen will be displayed.

TINT1

3. Press ◄► to adjust the level.

Operation	Adjustment	Adjustment
		range
Press ►	Adjusts skin tone	Maximum value
button.	toward reddish-purple.	31
Press ◄	Adjusts skin tone	Minimum value
button.	toward greenish color.	-31

Adjusting the color temperature

This is used to adjust the pictures if white areas appear bluish or reddish.

•Carry out this adjustment while the signals to be adjusted are being projected.

1.Press ▲▼ to select “COLOR TEMP.”.

PICTURE

PICTURE MODE	NATURAL
CONTRAST	0
BRIGHTNESS	0
COLOR	10
TINT	1
COLOR TEMP.	DEFAULT
GAMMA	DEFAULT
SHARPNESS	0
NOISE REDUCTION	OFF
DYNAMIC IRIS	OFF
SYSTEM SELECTOR	AUTO 1

MENU SELECT

CHANGE

2.Press ◄► to switch “COLOR TEMP.”.

•The setting will change as follows each time ◄► is pressed.

DEFAULT USER1 USER2

HIGH MID LOW

•When any setting other than “OFF” has been selected for color matching, the COLOR TEMP. setting is fixed at “USER1.”

•“DEFAULT” cannot be selected when the picture mode has been set to “USER.”

■To further adjust toward the desired white balance

3.Select “USER1” or “USER2” in Step 2.

4.Press ENTER.

•The “WHITE BALANCE” screen will be displayed.

WHITE BALANCE

WHITE BALANCE HIGH

WHITE BALANCE LOW

MENU SELECT

ENTER SUB MENU

5.Press ▲▼ to select “WHITE BALANCE HIGH” or “WHITE BALANCE LOW”.

6.Press ENTER.

•The “WHITE BALANCE HIGH (LOW)” screen will be displayed.

WHITE BALANCE HIGH

R255

G255

B255

MENU SELECT

ADJUST

7.Press ▲▼ to select “R”, “G” or “B”.

Basic Operation

ENGLISH – 51