Panasonic DW10000U manual Frame delay, Press to select Frame Delay, Press to switch Frame, Short

BRIGHT OUTSIDE

BRIGHT adjustment (right)

How to use ADVANCED MENU (continued)

15.Use ◄► to adjust the width for correcting the “BRIGHT INSIDE” setting (0 to 255).

16.Press ▲▼ to select “BRIGHT OUTSIDE”.

BRIGHT ADJUST

BRIGHT INSIDE

BRIGHT OUTSIDE

UPPER	0
LOWER	0
LEFT	0
RIGHT	0
MENU SELECT
ADJUST

17.Press ENTER.

•The “BRIGHT OUTSIDE” adjustment screen will be displayed.

BRIGHT OUTSIDE

INTERLOCKEDON

Wh0

R0

G0

B0

MENU SELECT

CHANGE

•When “INTERLOCKED” is set to “OFF”, individual adjustment of “R”, “G” and “B” will be possible.

18.Press ▲▼ to select an item, and press ◄► to adjust the setting.

Projection Edge blending width (right) range

Marker

BRIGHT INSIDE

Note

•The BRIGHT adjustment is a function for making the brightening of the BRIGHT level in those areas where the pictures overlap less conspicuous when multi-screens have been configured using edge blending. The optimal point is where, after the BRIGHT INSIDE has been adjusted, the compensation amount is the same for the BRIGHT levels in the areas where the pictures overlap and where the pictures do not overlap. If, after the BRIGHT INSIDE adjustment, only the vicinity of the borders of the areas where the pictures overlap and where the pictures do not overlap becomes bright, proceed to adjust the top, bottom, left and right widths. Alternatively, if only the vicinity of the borders has darkened as a result of the width adjustments, proceed with the BRIGHT OUTSIDE adjustment.

•When a rear screen or screen with a high gain is used, the joints may appear to be discontinuous depending on the viewing position.

Frame delay

When 1080/60i, 1 080/50i and 1 080/24sF signals are being input, this simplifies image processing so that the frame delay for pictures can be shortened.

1.Press ▲▼ to select “FRAME DELAY”.

ADVANCED MENU

DIGITAL CINEMA REALITY	AUTO
BLANKING
INPUT RESOLUTION
CLAMP POSITION
EDGE BLENDING	OFF
FRAME DELAY	DEFAULT
RASTER POSITION

MENU SELECT

CHANGE

2. Press ◄► to switch “FRAME
DELAY”.
• The setting will change as follows each time
◄► is pressed.
DEFAULT	SHORT
• DEFAULT:
This is the standard setting
• SHORT:
This causes the pictures to be delayed after the
audio.

64 – ENGLISH