Panasonic DW10000U Connecting signals to the DVI-D input module, DVI-D input module optional, # +

Installation of input module (optional) (continued)

Connecting signals to the DVI-D input module

DVI-D input module (optional)

ET-MD77DV

DVI Module
ET-MD77DV	DVI-D IN	LAN
DVI-D signal		LAN terminal*1
		(10BASE-T/100BASE-TX)

PC with DVI output	DVD player or high-vision video
	deck equipped with DVD/HDMI
	terminal

•Pin assignments and signal names of DVI-D input terminal are listed in the table at right.

#+

-4

5 =

Outside view

Pin	Signal	Pin	Signal
No.		No.
#	T.M.D.S data 2–	1
$	T.M.D.S data 2+	2	+5V
%	T.M.D.S data 2/	3	Ground
	4 shield	4	Hot plug detection
&		5	T.M.D.S data 0-
(		6	T.M.D.S data 0+
)	DDC clock	7	T.M.D.S data 0/
*	DDC data		5 shield
+		8
-	T.M.D.S data 1–	9
. T.M.D.S data 1+		: T.M.D.S clock shield
/	T.M.D.S data 1/	;	T.M.D.S clock+
	3 shield
0		=	T.M.D.S clock–

Note

•The DVI-D signal input module supports only a single link.

•The HDMI-DVI-D conversion cable is required to connect an HDMI-compliant device.

•The EDID mode setting must be selected so that it corresponds to the device to be connected. (p. 72)

•It is possible to connect the DVI-D input module with an HDMI- or DVI-D-compliant device, but with some devices the images may not appear or other problems may be encountered in operation.

*1: The LAN terminal of the input module (optional) cannot be used with the PT-D10000U/PT-DW10000U. Use the LAN terminal that is provided as standard with the projector.

32 – ENGLISH