Panasonic DW10000U, PT-D10000U manual Installation Setting, Press to select Altitude

Option2 settings (continued)

Installation Setting

A projection scheme can be chosen depending on the installation of the projector. If the picture is shown upside down or in reverse, change the projection scheme.

•Select the setting by displaying the on-screen indications using buttons of the remote control or the control panel on the main unit.

1.Press ▲▼ to select “INSTALLATION”.

OPTION2

PROJECTOR ID	2
INSTALLATION	FRONT-F
ALTITUDE	LOW
DIRECTION	H
LAMP SELECT	QUAD
LAMP RELAY	OFF
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO	LOGO1
PASSWORD

MENU SELECT

CHANGE

2.Press ◄► to switch “INSTALLATION”.

•The setting will change as follows each time ◄► is pressed.

FRONT-F	FRONT-C
REAR-C	REAR-F
Floor mount front projection
	(FRONT-F)
Ceiling mount front projection
	(FRONT-C)

Floor mount rear projection

(REAR-F)

Ceiling mount rear projection

(REAR-C)

3.Press MENU twice.

•The on-screen indications disappear and the normal screen appears again.

Altitude

When using the projector over 1 400 m above sea level, set to “HIGH”.

1. Press ▲▼ to select “ALTITUDE”.

OPTION2

PROJECTOR ID	2
INSTALLATION	FRONT-F
ALTITUDE	LOW
DIRECTION	H
LAMP SELECT	QUAD
LAMP RELAY	OFF
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO	LOGO1
PASSWORD

MENU SELECT

CHANGE

2.Press ◄► to switch “ALTITUDE”.

•The setting will change as follows each time ◄► is pressed.

LOW HIGH

76 – ENGLISH