Panasonic DW10000U Connecting the signal to the SD-SDI input module, SD-SDI input module optional

Installation of input module (optional) (continued)

Connecting the signal to the SD-SDI input module

SD-SDI input module (optional)

ET-MD77SD1 (for 480i/576i)

SD-SDI Module
	IN		OUT
ET-MD77SD1		SERIAL		LAN

LAN terminal*1

(10BASE-T/100BASE-TX)

SD-SDI signal	SD-SDI signal output
	(active through)

Business digital

VCR

Note

•Insert the input module suitable for the input signal specifications.

•Normally, use SYSTEM SELECTOR in “AUTO”.

•If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being input.

•If using an input module which supports two different signal specifications, use the SYSTEM SELECTOR menu to toggle between the two different types of signal. When this is done, the input signal details will appear on the screen momentarily and then disappear automatically.

AUTO 480i 576i

*1: The LAN terminal of the input module (optional) cannot be used with the PT-D10000U/PT-DW10000U. Use the LAN terminal that is provided as standard with the projector.

30 – ENGLISH