Panasonic DW10000U manual Registration of input signal data, Registration of new data, Press Enter

Registration of input signal data

MENU

▲▼◄►

ENTER

DEFAULT

The input signal data must be registered because it is not registered on shipment of the projector.

MENU	Press to display the
	MAIN MENU screen.

Press to select “SIGNAL LIST”.

Press to display the

“REGISTERED SIGNAL LIST” menu.

•The memories extend over 12 pages (A to L with 8 data items each, giving a total of 96 memories).

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

OPTION1

OPTION2

TEST PATTERN

SIGNAL LIST

NETWORK

SECURITY

MENU SELECT

ENTER SUB MENU

Registration of new data

When a new signal is supplied, press MENU on the remote control or operating section of the main unit. When its data has been registered, the “MAIN MENU” screen is displayed.

Note

•The data of 96 input signals can be registered.

•The signals supporting the installed input module are input and their data registered.

•The memories are numbered over 12 pages (A to L: 8 data items can be registered on each page), and the data is registered in the unused memory with the lowest number. If all the memories are used, the data of the old signals is overwritten in sequence.

•The names of the registered data are automatically determined by the input signals and memory numbers.

•If a menu is being displayed, the new signals will be registered at the instant they are input.

Renaming the registered signals

1.Press ▲▼◄ ► to select the signal whose details are to be displayed.

REGISTERED SIGNAL LIST

A1:SVGA72-A1	RGB1	---
A2:SVGA72-A2	RGB1	---
A3:SVGA72-A3	RGB1	---
A4:SVGA72-A4	RGB1	---
A5:SVGA72-A5	RGB1	---
A6:SVGA72-A6	RGB1	---
A7:SVGA72-A7	RGB1	---
A8:SVGA72-A8	RGB1	---
SELECT
ENTER DETAILS	DEFAULT	DELETE

2.Press ENTER.

•The “REGISTERED SIGNAL STATUS” screen will be displayed.

REGISTERED SIGNAL STATUS

NAME	SVGA72-A2
MEMORY NO	A2
INPUT	RGB1
fH	48.08kHz
fV	72.17Hz
SYNC.STATE	H(POS)
	V(POS)
ENTER RENAME

•The data items including the input signal name, memory number, input terminal, frequency and sync signal are automatically identified and displayed.

•When MENU is pressed, the “REGISTERED SIGNAL LIST” screen is restored.

40 – ENGLISH